Page 2 - Parker - Fulflo EcoBond Filter Cartridges

®
Fulflo EcoBond Filter Cartridges

Specifications

Materials of Construction: EBC Length
Filter Medium EBC Flow Factors Factors
100% melt blown polypropylene Aqueous Length Length
End Caps/Adapters (optional) Service (in) Factor
polyolefin copolymer PSI/GPM
Seal Options 9.75 1.0
Rating per 10 in
Various; refer to Ordering 10.00 1.0
(µm) Cartridge
Information 19.50 2.0
Maximum Recommended Operating EBC1 0.10 20.00 2.0
Conditions: EBC5 0.08 29.25 3.0
Temperature: EBC10 0.07 30.00 3.0
@ 40 psid (2.7 bar): 80°F ( 27°C) EBC25 0.06 39.00 4.0
@ 20 psid (1.4 bar): 140°F (60°C) EBC50 0.05 40.00 4.0
Flow Rate:
5 gpm (18.9 lpm) per 10 in length Flow Rate and Pressure Drop Formulas
Recommended Maximum: Flow Rate (gpm) = Clean P x Length Factor
Change Out P: 30 psi (2.1 bar) Viscosity x Flow Factor
Operating Differential Clean P = Flow Rate x Viscosity x Flow Factor
Pressure @ Ambient Temperature: Length Factor
40 psi (2.7 bar)
1. Clean P is PSI differential at start.
Dimensions: 2. Viscosity is centistokes. Use Conversion Tables
1-1/16 in ID x 2-7/16 in OD (max) for other units.
3. Flow Factor is P/GPM at 1 cks for 10 in
10, 20, 30, 40 and 50 in continuous
nominal lengths (or single).
4. Length Factors convert flow or P from 10 in
Nominal Filtration Ratings (90%) : (single length) to required cartridge length.
1µm, 5µm, 10µm, 25µm, and 50µm

Ordering Information

EBC

Cartridge Code Micrometer Filter Medium Nominal Length (in) End Cap Configuration Seal Material
EBC = EcoBond Rating (µm) M = FDA Grade Code in mm None = DOE (w/o gaskets) None = No Seal Material
Cartridge 1 Polypropylene 9-4 = 9-3/4 248 AR = 020/Flat (Gelman) (Std. DOE)
5 10 = 10 254 DO = Double open end (DOE) P = Poly Foam Gaskets
10 19-4 = 19-1/2 495 LL = 120 O-Ring both ends** w/Collars (DO only)
25 20 = 20 508 LR = 120 O-Ring/Recessed** E = EPR
50 29-4 = 29-1/4 743 OB = Std. Open End/Polypro N = Buna-N
30 = 30 762 spring closed end S = Silicone (O-Ring only)
39-4 = 39 991 PR = 213 O-Ring/Recessed** T = PFA Encapsulated
40 = 40 1016 SC = 226 O-Ring/Flat Viton* (222, 226
50 = 50 1270 SF = 226 O-Ring/Fin O-Ring Only)
TC = 222 O-Ring/Flat V = Viton*
TF = 222 O-Ring/Fin W = Poly Foam Gaskets
TX = 222 O-Ring/Flex Fin without Collars (DO only)
XA = DOW w/Extended Core
XB = Ext. Core Open End Polypro ** Available only in 9-3/4 (9-4) and
spring closed end 19-1/2 (19-4) lengths.

Specifications are subject to change without notification. © 2007 Parker Hannafin
*Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Process Advanced Filtration Inc.
All Rights Reserved
SPEC-C1320-Rev. A 01/08

ENGINEERING YOUR SUCCESS.

62