Page 2 - Parker - Trufluor

Trufl uor ™
Housing Differential Pressure vs. Liquid Flow Rate
Flow Rate (lpm)
SPECIFICATIONS
0 10 20 30 40 50
Materials of Construction 1
Head and Bowl: High purity PFA 60
0.9
O-Ring: FEP Encapsulated Viton ®
0.8
50
NPT Plugs: High purity PFA 0.7
Threaded 0.6 40
Head Inserts: PTFE coated 316
Stainless steel Differential Pressure (psid) 0.5 30 Differential Pressure (mbar)
Connections 0.4
Inlet/Outlet: ¾˝ NPT or Butt-weld
Vent and Drain: ¼˝ NPT 0.3 20
Maximum Operating Specifi cations 0.2
TFH (PFA): 10
0.1
65psig (4.5bar) @ 203ºF (95ºC)
75psig (5.2bar) @ 68ºF (20ºC) 0 0
TVH (PVDF): 0 2 4 6 8 10 12 14
Flow Rate (gpm)
110psig (7.6bar) @ 203ºF (95ºC)
150psig (10.3bar) @ 68ºF (20ºC) This housing is not recommended for compressed air or gas service. It is suitable for use with fully compatible liquids (which do not
soften, swell or adversely affect the product or its materials of construction) only. This housing is not recommended for acid service at the
pressure shown.
Please contact Parker for detailed compatibility information.
NOTE: Use of this product in a manner other than in accordance with Parker’s current recommendations may lead to injury or loss.
Parker cannot accept liability for such injury or loss.
Cartridge Confi gurations Supported
Size Description Minimum
222 | Flat End Cap Overall Overall Clearance
4˝ Width (A) Length (B) for Cartridge
SS Reinforced 222 | Flat End Cap Housing Part#
Removal
222 | Flat End Cap
10˝ Inches cm Inches cm Inches cm
SS Reinforced 222 | Flat End Cap
25
7
TFH04N08N02T 4- ⁄ 8 12.4 7- ⁄ 32 19.8 6 15.2
25
21
TFH04W08N02T 7- ⁄ 32 19.4 7- ⁄ 32 19.8 6 15.2
Notes: 7
1. Dim. A1 = ¾˝ Butt-weld TFH10N08N02T 4- ⁄ 8 12.4 16 40.6 13 33.0
21
Dim. A2 = ¾˝ NPT TFH10W08N02T 7- ⁄ 32 19.4 16 40.6 13 33.0
2. Material: 7 25
TFH = High purity PFA TVH04N08N02T 4- ⁄ 8 12.4 7- ⁄ 32 19.8 6 15.2
25
21
TVH = PVDF TVH04W08N02T 7- ⁄ 32 19.4 7- ⁄ 32 19.8 6 15.2
3. O-ring: FEP Encapsulated Viton ® 7
TVH10N08N02T 4- ⁄ 8 12.4 16 40.6 13 33.0
21
TVH10W08N02T 7- ⁄ 32 19.4 16 40.6 13 33.0
Ordering Information
08 02 T

Model Bowl Length Connection Type Connection Size Drain/Vent Type Drain/Vent Size Seal Material
CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
TFH Trufl uor PFA 10 10˝ N NPT 08 ¾˝ N NPT 02 ¼˝ FEP
T Encapsulated
TVH Trufl uor PVDF W Butt -weld W Butt-weld Viton ®
Specifi cations are subject to change without notifi cation. © 2008 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - N.A.
Viton is registered trademark of E.I. DuPont de Nemours & Co., Inc. All Rights Reserved
DS_ME_Trufl uor Housing Rev. A