Page 2 - Parker - BEVPOR MH bottled water filter cartridges
P. 2
BEVPOR MH
Bottled Water
Specifications
Materials of Construction Effective Filtration Area (EFA) Integrity Test Data
❙ Filtration Membrane: Polyethersulphone 10¨ (250 mm) Up to 0.8 m (8.61 ft ) All filters are flushed with pharmaceutical
2
2
❙ Prefilter Layer: Polyester grade purified water prior to despatch. They
❙ Upstream Support: Polyester Cleaning and Sterilization are integrity tested to the following limits:
❙ Downstream Support: Polyester BEVPOR MH cartridges can be repeatedly
❙ Inner Support Core: Polypropylene steam sterilized in-situ or autoclaved at up
❙ Outer Protection Cage: Polypropylene to 130 °C (266 °F). They can be sanitized with Diffusional Flow Micron Rating
❙ End Caps: Nylon hot water at up to 90 °C (194 °F) and are Test Parameters 0.20 0.45
❙ End Cap Insert: 316L Stainless Steel compatible with a wide range of chemicals.
❙ O-rings: Silicone / EPDM Please refer to our Clean-in-Place support Test Pressure (barg) 2.4 1.7
guide or contact your local Parker Test Pressure (psig) 35.0 25.0
representative for more information. Max Diffusional
Food Contact Compliance Flow per 10¨ (ml /min) 21.0 21.0
Materials conform to the relevant Retention Characteristics
requirements of FDA 21CFR Part 0.2µm BEVPOR MH filters have been
177, current EC1935 / 2004 and current USP validated to provide sterile effluent after Manufacturing Traceability
Plastics Class VI - 121 °C. bacterial challenge testing following ASTM Each filter cartridge displays the product
F838-05 methodology on 10” cartridges with name, product code and lot number.
more than 10 cfu per cm using Additionally, each module displays a unique
7
2
Recommended Operating Conditions Brevundimonas diminuta. serial number providing full manufacturing
Up to 70 °C (158 °F) continuous operating traceability.
temperature and higher short-term In addition, challenges with the following EU
temperatures during CIP to the following regulated organisms have been performed.
limits:
Organism LRV when challenged with a
Temperature Max Forward dP minimum of 10 cfu per cm 2
7
°C °F (bar) (psi) 0.20 0.45
20 68 5.0 72.5
40 104 4.0 58.0 Serratia marcescens FR FR
60 140 3.0 43.5 Escherichia coli FR FR
80 176 2.0 29.0 Enterococcus faecalis FR FR
90 194 1.0 14.5 Clostridium perfringens FR FR
>100 (steam) >212 (steam) 0.3 4.0 Pseudomonas aeruginosa FR FR
Brevundimonas diminuta FR 5
*FR - Fully retentive during challenge
When expressed as titre reduction “FR” equates to
>10 7 per 10¨module. Europe: ✆ +44 (0)191 4105121 dhprocess@parker .com | North America: ✆ toll free: +1 877 784 2234 dhpsales.na@parker .com | www.parker .com/dhbottledwater
Ordering information
BMH - - A
Code | Length (Nominal) Code | Micron Code | End Cap (10 inch) Code | O-rings
1 10¨ (250 mm) 02 0.20 µm C Fin / 226 Bayonet S Silicone
2 20¨ (500 mm) 04 0.45 µm D Fin / 222 E EPDM
3 30¨ (750 mm) E Flat Top / 222
4 40¨ (1000 mm) G Recess / 222
R BF / 222 Bayonet
VSH & HSL
HOUSING RANGE
AVAILABLE
Parker domnick hunter has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of DS_BW_08_01/14 Rev. 1B
any alterations. This publication is for general information only and customers are requested to contact our Process Filtration Sales Department for detailed information and advice on a
products suitability for specific applications. All products are sold subject to the company’s standard conditions of sale.
