Page 186 - Tubelite Electrical Catalog

SALES@ TUBELITE. C OM WWW . TUBELITE. C OM

HDU

Anchor BlastLite Stencil
TM
Anchor® brand Stencil Products continue to produce consistently high quality
results with a variety of versatile stencils and fillers for every application. They
provide superior blast resistance, precise design capabilities, clean transfers, smooth
accurate tracking and a convenient selection of sizes.

u Superior blast resistance prevents burning under the most intense blasting
u Cleaner transfer of artwork to stencil and easy-release liner increase efficiency
u Excellent shape carving ability for precise detailing on even the most intricate designs
u A flexible product line designed for use by hand, machine or computer-cutting applications

111 - Medium Tack 43 Mil 125- High Tack 36 Mil
Designed specifically for hand-cutting, panels can be replaced Designed for sandblasting on raw wood and urethane foam board.
accurately and easily. Superior shape carving and easier cutting Easy-release light blue liner. Eliminates the need for filler or spray
means less wear on instruments - white release liner removes easily. adhesives. Not recommended for use on some woods without first
Use with IPG®/Anchor® Filler #211. testing. Do not use on pre-painted, pretreated or glass surfaces.

Item Size Item Size
111/30-1/2X10 30 1/2” X 10YD 125/25X10 25” X 10YD
116 - High Tack 33 Mil 226- High Tack BlastLite™ 22 Mil
Computer stencil for use on raw wood surfaces and urethane High-tack BlastLite™ is a specially-formulated rubber mask that
foam board. The 15” has trimmed edges and a strong, clear film is long-lasting and easy to use. Natural flexibility properties and
liner that offers easy alignment. The 30” is for use on large pin impact resistance makes it ideal for all substrates where shallow
plotters and the stencil rubber extends to the edge of the liner. blasting is required. BlastLite™ High-tack Stencils are coated with
Not recommended for use on some woods without first testing. an acrylic adhesive for use on raw wood, unprimed HDU, brick or
Do not use on pre-painted, pretreated or glass surfaces. unglazed tile. Available unpunched or friction fed.

Item Size Item Size
116/15X10 15” X 10YD T226/25X10 25”X10YD
116/30X10 30” X 10YD T226/30X10 30”X10YD

117 - Medium Tack 33 Mil 227- Medium Tack BlastLite™ 22 Mil
For use with computerized cutting machines. A strong, clear film Specially formulated rubber mask that is long-lasting and easy to
liner provides extra rigidity. The 15” width will track through use. Natural flexibility properties and impact resistance make it
most computer cutters. the 30” width will track only through a ideal for use on all substrates where shallow blasting is required.
large pin plotter and the stencil rubber extends to the edge of BlastLite™ Medium-tack Stencils are designed for primed and
the liner. After letters and designs are cut, they must be taped for painted surfaces, glass, plastics, synthetic stone and glazed tile.
transferring the stencil to stone. Use with IPG/Anchor Filler #211. Available unpunched or friction fed.
Item Size Item Size
117/15X10 15” X 10YD T227/25X10 25” X 10YD
117/30X10 30” X 10YD
IPG/Anchor Filler 211

Works with stencil adhesives to
create a bond that withstands
Item Size 100-150 lbs or greater PSI and
remain bonded to the stone or
211FILLER/GL Gallon substrate.

184