Page 397 - Tubelite_Catalog
P. 397

CALL 800 -505 - 4900      F AX 800 -505 - 7 454



                                                                                         ADHESIVES








        LORD  Acrylic Adhesives                                                                                       TAPES & ADHESIVES
                 ®
        Acrylic-based adhesives are primarily used to bond metals, composites and a large number of thermoplastic
        materials. They require little to no surface preparation or primers and cure at room temperature. Acrylics
        offer toughness that delivers impact resistance, excellent low- and high-temperature performance, and
        desirable in-service fatigue life on top of high structural strength in bonded assemblies.

        Lord   201
              ®
        LORD 201 acrylic  adhesive can be cured with either  LORD   Lord    410
                                                                          ®
        Accelerator 4, LORD Accelerator 17 or LORD Accelerator 19. 5-8   20-45 min. Work Time / 24 Hour Cure Time
        hour work time, 24 hour cure time.
           Item                          Size                          Item                     Size
           LO1/201/0.1GL                 0.1 GL                        LO1/410-19W/GLASSBEADS   375ml
           LO1/201/19                    50ml                          LO1/410-19LPCX           380ml
           LO1/201/19-225                225ml
                                                                          ®
           LO1/201/5GL                   5 GL                       Lord    Maxlok™ T6
        Lord   204                                                  LORD® Maxlok™ MX/T6 works
              ®
                                                                    over a wide range of temperature
        Use LORD® 204 Acrylic Adhesive with LORD Accelerator 4, 17 or 19.   environments  subject  to  high
        6-8 minute work time, 24 hour cure time.                    impact or high peel loads Use
                                                                    LORD Maxlok™ T6 with LORD
           Item                          Size                       Accelerator 4.
           LO1/204/0.1GL                 1 GL

        Lord   403                                                     Item                     Size
              ®
                                                                       LO1/MX/T6-50ML           50ml
        Use LORD® 403 acrylic adhesive in combination with LORD
        Accelerator 19 or 19GB. 2-4 min. Work Time / 24 Hour Cure Time.  LO1/MX/T6-375ML        375ml
           Item                          Size                       LORD   Accelerators
                                                                           ®
           LO1/403-19LP-50               50ml
                                                                    LORD® Accelerator 4 is a no-mix curative
           LO1/403/225ML                 225ml                      designed for use LORD 200 series,
           LO1/403-19LPCX                380ml                      500  series,  and  MaxlokTM  T6  acrylic
                                                                    adhesives. Use with bond thickness of 20
           LO1/403-19GB                  -
                                                                    mils or less.
        Lord    406                                                 LORD   Accelerator 4
                                                                          ®
              ®
        6-10 min. Work Time / 24 Hour Cure Time                      Item                      Size
           Item                         Size                         LO1/4/QT                   QT
           LO1/406-19LP-50              50ml                         LO1/4/GL                   GL
           LO1/406-17LP                 200ml
                                                                    Use LORD® Accelerator 17 with LORD 200, 400, 500
           LO1/406/225ML                225ml                       or 600 series acrylic adhesives.
                                                                          ®
           LO1/406-17LPCX               380ml                       LORD   Accelerator 17
           LO1/406-19LPCX               105ml                        Item                      Size
           LO1/406-19-50W/GLASSBEAD     50ml                         LO1/17/4.1GL              QT






                                                                                                                   395
   392   393   394   395   396   397   398   399   400   401   402