Page 2 - VERAK IP

VERAK IP ® 2 Overview Material specification Contents • Corner verticals: 2 mm steel • End frames: 2 mm steel Introduction 3 • Panel mounts: 2.0 mm steel Technical specifications 4 • Panel mount supports:1.5 mm steel Configuration 5 • Side panels and doors: 1.5 mm steel Structural elements 6 Accessories 8 • Top panels: 1.2 mm steel • Glazed door: 1.5 mm steel • VERAK load capacity:1.000 Kg ® Standards IEC 60297: Dimensions of mechanical structures of the 482.6 mm (19”) series DIN 41494: Basic specification for the 19” construction systems EN 60950: European safety standard for information technology equipment VDE 0100: Installation and Set up of current systems and earthing Colour specification Standard VERAK IP ® RAL 7035 Cabinet frame, side panels, panel mount supports and 19” panel mounting angles RAL 7037 Top cover, front and rear doors Protection 1 number Definition st 0 No protection 1 Protected against solids objects over 50 mm (e.g. accidental touch by hands) Dimensions 2 Protected against solids objects over 12 mm (e.g. fingers) 3 Protected against solids objects over 2.5 mm (e.g. tools and wires) Floor version Depth: 600 - 800 mm Width: 600 - 800 mm 4 5 Protected against solids objects over 1 mm (e.g. tools, wires and small l wires) Protected against dust - limited entry (no harmful deposit) 6 Totally protected against dust 2 number Definition nd 0 No protection 1 Protected against vertically falling drops of water 2 Protected against vertical direct sprays 3 Protected against vertical direct sprays up to 60° 4 Protected against sprays from all directions - limited entry permitted 5 Protected against sprays 6 Protected against strong jets of water 7 Protected against the effects of temporary immersion 27U 37U 42U 47U 8 Protected against long periods of immersion under pressure www.apw.eu.com