Page 19 - Icon Ridge Carpentry and Roofing Catalog

Roof, Wall, Facade

Film Adhesive

• Special sealing adhesive for a permanent airtight attachment of
vapour-proof membranes and barrier layers according to DIN 4108-7
• Self-adhesive and permanently elastic, consequently structural
movements can be absorbed without difficulty
Areas of application:
• Bonds to masonry, concrete, plaster, plasterboard and wood
Usage instructions:
• Adhesive surfaces must be absorbent, clean, dry, free of grease and
stable
• Very large breakouts/pitting on the building structure must be levelled
off beforehand
• Apply the film adhesive to the substrate in an approx. 8 mm thick
bead with no gaps
• Press the material to be bonded well – do not squeeze
• Pay attention to the strain relief loop
• Bonds only reach full strength after drying out
• In case of doubt, contact us

Technical Data
Colour: Blue-grey
Density: Approx. 1.2 g/cm 3 Relief strap
Curing: Approx. 2–3 days (depending on layer
thickn., film type and building moisture)
Working temperature: +5 °C to +35 °C
Temperature resistance: -20 °C to +60 °C
Shelf life: 12 months Bead of film
adhesive
Please observe the information in our technical and safety data
sheets
Article No. Article Description QTY
Vapour
6880 7 310 C(310ML)FILM ADHESIVE 25 barrier
6880 7 580 B(580ML)FILM ADHESIVE 20

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 19