Page 22 - Icon Ridge Carpentry and Roofing Catalog

Roof, Wall, Facade

Nail Sealing Tape DSK

• Double sided adhesive nail sealing tape for rain-tight sealing
between FÖRCH underlay sheets and the counter battens
conforming to the ZVDH regulation*
• As a result of the double sided application of adhesive, the nail
sealing tape can be conveniently pre-fitted to the counter battens in
the workshop
• PE based
• Foam thickness: 3 mm
Usage instructions:
• Variant 1: Stick the nail sealing tape parallel to the rafters onto the
clean and well tensioned outer side of the underlay sheet. Next,
remove the top silicone paper and lay down the counter batten. As a
result of the subsequent screwing or nailing of the counter batten
onto the rafter, the nail sealing tape forms an ideal bond / seal
between the underlay sheet and the counter battens.
• Variant 2: Bond the nail sealing tape to the clean and dry counter
batten (preparation can be carried out in the workshop). Next,
remove the top silicone paper and lay the counter batten on the
underlay sheet. As a result of the subsequent screwing or nailing of
the counter batten onto the rafter, the nail sealing tape forms an ideal
bond / seal between the underlay sheet and the counter battens.
Recommendation:
• Paint over naturally weathered staples with nail sealant Art. No. 6880
11 500

Article No. Article Description QTY
8846 50 1 RO(30M)NAIL SEAL.TAPE DSK 50MM e 21
8846 60 1 RO(30M)NAIL SEAL.TAPE DSK 60MM e 18
8846 80 1 RO(30M)NAIL SEAL.TAPE DSK 80MM e 12
*Matched to FÖRCH underlays

UDB System Adhesive Tape

• High performance adhesive tape for bonding the Saniflex 002
airtight membrane, as well as FÖRCH sarking membranes and
underlay sheeting
• Can be plastered and painted over
• Permanently moisture resistant, heat resistant and ageing resistant
• Diffusible, S < 9 m
d
• Up to 4 months open weathering resistance (UV resistant)
• For joint bonding of softwood fibreboard (e.g., valley or ridge area)
we recommend FÖRCH system primer (Art. No. 6880 1000)

Technical Data
Carrier: PP spun-bonded fabric with Non-woven/film composi.
PP coating
Adhesive strength: >35 N/25 mm Polyacrylate adhesive
Moisture resistant: Permanently resistant Separation layer
Temperature range: -30 °C to +80 °C
Working temperature: +5 °C to +40 °C
Tape width: 60 mm / 100 mm / 150 mm
Roll length: 25 m
Colour of PP spun-bonded fabric: Anthracite
Storage: +5 °C to +25 °C
* In line with the particular DIN

Article No. Article Description QTY
8847 60 RO(25M)SYSTEM ADHES.TAPE UDB e 10
8847 100 RO(25M)SY.ADHES.TAPE UDB 100MM e 6
8847 150 RO(25M)SY.ADHES.TAPE UDB 150MM e 4

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 22