Page 35 - Icon Ridge Carpentry and Roofing Catalog

Chemical pr
oducts f
Chemical products for construction
or construction
Platform Roof Adhesive Foam

• Moisture-curing 1K-PU adhesive foam for efficient, clean,
economical, durable and safe bonding of thermal insulation boards Your Advantage / Benefit
• Tested acc. to the requirements of ETAG-006-guideline
• Can be processed from -5°C ambient temperature and +5°C can Time savings up to 30 %
temperature Clean processing
• Reduced post-expansion Universal adhesive range with high Initial tack
• No mechanical fixing required Evens out unevenness in an optimum way
• Also for vertical and overhead bondings Ideal for bonding polystyrene (EPS + XPS) and PIR / PUR rigid
• Economical in use (approx. 14 m²/800-ml-can) foam
• Ideal for the bonding of polystyrene (EPS+ XPS) and PIR / PUR rigid
foam panels for flat roofs and perimeter area, facade insulation, as
well as for dry construction, basement ceiling insulation, and the
bonding of non-bearing gas-concrete blocks Application
• Suitable for most building substrates such as sanded bitumen
sheets, corrosion-protected steel sheets, fiber cement panels,
gas-concrete, chipboards, hard PVC, stone, plaster, wood, bitumen
thick coatings and emulsion paints
• Thermal conductivity of 0.035 W / (m x K) as ideal complement to the
thermal insulation of insulation boards when doing the joint filling
Processing instructions:
• Refer to the instructions of the insulation material manufacturers
• Please refer to our technical data sheet on foerch.com/datasheets

Technical Data
Basis: 1K-polyurethane Number of adhesive strand per m²
Tack-free surface: approx. 8 min (30 mm foam line length) Roof area
Fully chargeable: approx. 12 h (30 mm foam line length) height in m Interior Inner Outer Corner
edge edge area
Heat conductivity (DIN 52612): approx. 0.035 W / (m × K) region
Tensile strength (DIN EN 1607): 0.19 N/mm² region
Shear strength (DIN EN 12090): 0.142 N/mm² Wind zone 1 - all area categories
Shear modulus (DIN EN 12090): 0.489 N/mm²
Temperature resistance: -40 °C to + 90 °C up to 12 m 3 3 4 5
(short term +120 °C)
Processing temperature: -5 °C to +35 °C (adhesive surface) Wind zone 2 - area categories 2 to 4
+5 °C to +25 °C (can) up to 12 m 3 3 4 5
Building material class
(DIN 4102 part 1): B 1 (flame resistant) 12 up to 20 m 3 3 5 6
Shelf life: 12 months
Colour: orange Wind zone 3- area categories 2 to 4
up to 12 m 3 3 5 6
Article No. Article Description QTY
6800 8110 PLATFORM ROOF ADH. FOAM 800ML e 12 12 up to 20 m 3 4 6 7

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 35