Page 40 - Icon Ridge Carpentry and Roofing Catalog

Chemical products for construction

Enkolit Metal Cold Glue

• For adhesion of metal profiles and sheet metal made from titanzinc,
copper, aluminium, stainless steel, lead etc. onto a range of building
materials
- Universally applicable
• Durable adhesive compound
- No running of adhesive on vertical surfaces
- Ideal for adhesion of window sills, vergeboards and rainwater pipes
as well as metal casings
• All-over adhesion
- No cavity
- Prevents nesting of insects and drumming noises caused by rain
- Prevents corrosion damage due to moisture on the underside of the
sheet
• Complies with DIN 1055 „design load for buildings (wind load)“
• Corresponds to the report regarding adhesive strength after 30 years
by Richard Gruen Institute
Processing instructions:
• For adhesion from sheet metal on sheet metal an additional,
mechanical fixing has to be applied
• The consumption herefore may not exceed 1.5 kg/m²
Laying on horizontal surfaces:
• A 10 cm wide sheet has to be adhered on wall, attic or balustrade
cladding which consist of several components
• An expansion compensation has to be created for continuous metal
profiles
Laying on sloping or vertical surfaces:
• In order to prevent sliding of the freshly fitted metal sheets, it is
necessary to apply mechanical fix points
• Enkolit metal cold glue has to be applied on both sides for vertical
application
• Pressure has to be applied when fixing the components together
• Porous and priming surfaces have to be primed
Important:
• When applying Enkolit on both components parts which need to be
fitted together, then it is important that the grooves run in the same
direction
• If the adhesion surfaces are more than 30 cm wide, then Enkolit has
to be applied on both sides
• This does not mean to apply double quantities, but to apply the
designated quantity of Enkolit equally on both sides
Following surfaces are not suitable for Enkolit metal cold glue:
• Roof sheeting, bituminous surfaces, plastic foils as they are used for
roofing, non-mineral insulating materials e.g. polystyrole, silicone,
butyl, Thiokol, acrylic and polyurethane-adhesives

Technical Data
Colour: black
Handling temperature: +5°C to + +30°C
(environment and surface) right
Consumption even surface: approx. 2 -3 kg/m²
Adhesive range: max. 60 min after application

Article No. Article Description QTY
6880 11 ENKOLIT METAL-COLDGLUE 11KG 1
6880 11 4 ENKOLIT METAL-COLDGLUE-SO 11KG 1
6880 11 5 ENKOLIT METAL-COLDGLUE-WI 11KG 1
6880 11 1 ENKOLIT METAL-COLDGLUE 310ML 12 wrong
• Art.-No. 6880 11: spring / autumn quality
• Art.-No. 6880 11 4: summer quality
• Art.-No. 6880 11 5: winter quality
• Art.-No. 6880 11 1: applicable universal all-season

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 40