Page 228 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Screw Anchor, Blue Galvanized Steel

• With general technical approval number Z-21.1-1503 for anchoring in
non-cracked concrete and for anchoring of light-weight ceiling clad-
dings and suspended ceilings in concrete
• Screw anchor from Ø 10.0 x 70 on with general technical approval
number Z-21.1-1549 or ETA approval ETA 05/0010 for anchoring in
cracked and non-cracked concrete
• Wrench size Ø 7.5 = SW 13. Ø 10.0 = SW 16, Ø 12.0 = SW 18
• Fixture with technical approval without screw in concrete, in the
interior
• Assembly of handrails, metal structures, pipings in the sanitary and
ventilation field, wood structures, joists, purlins, sills, etc.
• Assembly of light-weight suspended ceilings and ceiling claddings
• High extract values at little setting depths
• Fire protection tested; fulfills fire resistance class F 120
• Fire protection tested in concrete, sand-lime bricks, solid bricks,
clinker, natural stone and hollow block concrete
• From 12 x 200 on: is used in wooden construction to fix sills (incl.
appropriate washer DIN 440)
Technical Data *Recommended loads in kN
• Art.-No. 8170 120 60: not part of the approval
Drill- Anch.- Clamping Tens.load in Tens.load in
Ø depth thickness cracked concr. uncrack.concr.
Article No. Article Description QTY mm mm mm C20/25 C20/25
8170 140 110 HEX. SCREW ANCH. GV 14.0X110 25 12 95 15 8,2 12,3
8170 140 130 HEX. SCREW ANCH. GV 14.0X130 25 12 95 35 8,2 12,3
8170 140 150 HEX. SCREW ANCH. GV 14.0X150 25 12 95 55 8,2 12,3
8170 160 130 HEX. SCREW ANCH. GV 16.0X130 10 14 115 15 12,1 16,4
8170 160 150 HEX. SCREW ANCH. GV 16.0X150 10 14 115 35 12,1 16,4
¹according to DIBT-approval Z-21.1-1503
* not part of the ETA-approval

Screw anchor with pressed-on washer DIN 440, gv

• MMS-plus screw anchor for anchoring in cracked and uncracked
concrete
• ETA permit 15/0784, Option 1
• Fire resistance class F120
• Suitable for the installation of sprinkler systems
• Approved for use under seismic impact C1
• Hexagonal head with pressed-on DIN 440 washer and stamped head
• Concrete thread: Reduced core diameter and larger outer diameter
for greater effective surface area
• Functional highlights: Larger outer diameter and stronger toothing
for less wear
• Anchor-less approved fastening in concrete in interior areas
• Installation of wood structures, beams, stringers, sills, etc.

Technical Data
Larg.perm. Larg.perm.
Pilot Disk Clamping Anchoring tens.load of tens.load of
hole Ø mm thickn. depth mm cracked un-cracked
Ø mm mm concr. concr.
Article No. Article Description QTY C 20/25 in kN C 20/25 in kN
8171 120 180 SCREW ANCH.HEX GALV.12,0X180 25 10 43,5 90 – 105 75 – 90 5,9 – 7,9 9,9 – 12,3
8171 120 200 SCREW ANCH.HEX GALV.12,0X200 25 10 43,5 110 – 125 75 – 90 5,9 – 7,9 9,9 – 12,3
8171 120 240 SCREW ANCH.HEX GALV.12,0X240 25 10 43,5 150 – 165 75 – 90 5,9 – 7,9 9,9 – 12,3
8171 120 280 SCREW ANCH.HEX GALV.12,0X280 25 10 43,5 190 – 205 75 – 90 5,9 – 7,9 9,9 – 12,3
8171 120 320 SCREW ANCH.HEX GALV.12,0X320 25 10 43,5 230 – 245 75 – 90 5,9 – 7,9 9,9 – 12,3

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 228