Page 223 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Bolt anchor PTB-SS-ETA1-PRO, stainless steel A4

ETA 10/0230 ETAG 001, Part 2, option 1 Approval for single fixings

Loads and characteristic values M8 M10 M12 M16
h ef,1 h ef,2 h ef,1 h ef,2
Admissible transverse load Option 1 cracked concrete
C20/25 Approval N [kN] 1,19 2,98 4,76 4,76 7,94 7,94
C25/30 Approval N [kN] 1,30 3,26 5,22 5,22 8,69 8,69
C30/37 Approval N [kN] 1,45 3,62 5,79 5,79 9,66 9,66
C40/50 Approval N [kN] 1,68 4,21 6,73 6,73 11,22 11,22
C50/60 Approval N [kN] 1,84 4,61 7,38 7,38 12,30 12,30
Admissible transverse load Option 1 Non-cracked concrete
C20/25 Approval N [kN] 3,57 5,71 7,14 9,52 9,52 14,29
C20/30 Approval N [kN] 3,91 6,26 7,82 10,43 10,42 14,29
C30/37 Approval N [kN] 4,34 6,95 8,69 11,59 11,59 17,38
C40/50 Approval N [kN] 5,05 8,08 10,10 13,47 13,47 20,20
C50/60 Approval N [kN] 5,53 8,85 11,07 14,75 14,75 22,13

Admissible transverse load (cracked concrete) C20/25 Approval V [kN] 4,34 8,04 11,61 11,61 21,88 21,88
Admissible bending moment Approval M [Nm] 10,27 20,54 36,16 36,16 91,96 91,96
Axis and edge distances
Anchoring depth h ef [mm] 40 60 60 80 80 100
Distinctive axis distance (concrete cone) s cr [mm] 120 180 180 240 240 300
Characteristic edge distance (concrete cone) c cr [mm] 60 90 90 120 120 150
Distinctive edge distance / for edge distance c s min [mm] 50/90 55/90 60/100 60/100 70/130 70/130
Minimum edge distance /for centre distance s c min [mm] 55/120 60/150 65/190 65/190 85/160 85/160
Minimum component thickness h min [mm] 100 120 120 160 160 200
Assembly data
Drilling hole diameter d o [mm] 8 10 12 12 16 16
Clearance hole in the add-on part d f [mm] 9 12 14 14 18 18
Drilling hole depth h 1 [mm] 55 75 75 95 100 120
Torque when anchoring T inst [mm] 25 45 70 70 120 120
Wrench size SW [mm] 13 17 19 19 24 24

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 223