Page 236 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Extract from the usage conditions of the approval ETA-10/0108
Total safety coefficient according to ETAG (γM and γF)

Loads and parameters Composite Anchor R-CAS-V M8 M10 M12 M16 M20 M24 M30
Characteristic load capacity in uncracked concrete
C20/25 NRk,p [kN] 25.0 30.0 50.0 60.0 95.0 140.0 200.0
Increase factors for NRk,p C30/37 1.04 1.0
C40/50 1.07 1.0
C50/60 1.09 1.0
Characteristic load capacity steel 5.8 VRk,s [kN] 9.0 14.0 21.0 39.0 61.0 88.0 140.0
Characteristic load capacity steel 8.8 VRk,s [kN] 15.0 23.0 34.0 63.0 98.0 141.0 224.0
Characteristic load capacity steel 10.9 VRk,s [kN] 18.0 29.0 42.0 78.0 122.0 176.0 280.0
Characteristic load capacity steel A4-70 VRk,s [kN] 13.0 20.0 29.0 55.0 86.0 124.0 196.0
Characteristic bending torques steel 5.8 MRk,s 19.0 37.0 65.0 166.0 324.0 561.0 1.124.0
[Nm]
Characteristic bending torques steel 8.8 MRk,s [Nm] 30.0 60.0 105.0 266.0 519.0 898,0 1.799.0
Characteristic bending torques steel 10.9 MRk,s [Nm] 37.0 75.0 131.0 333.0 649.0 1,123.0 2.249.0
Characteristic bending torques steel A4-70 MRk,s 26.0 52.0 92.0 233.0 454.0 786.0 1.574.0
[Nm]
Axial spacing and edge clearance
Effective anchoring depth h ef [mm] 80 90 110 125 170 210 270
Minimal axial spacing s min [mm] 40 45 55 62.5 85 105 135
Minimal edge clearance c 40 45 55 62.5 85 105 135
min [mm]
Minimum component thickness h min [mm] 120 130 140 180 230 270 340
Mounting data
Drilled hole diameter d 10 12 14 18 24 28 35
o [mm]
Through-hole in the mounted part d f [mm] 9 12 14 18 22 26 32
Min. drilled hole depth h o [mm] 85 95 115 130 175 215 275
Anchoring torque T 10 20 40 80 120 180 300
inst [mm]

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 236