Page 372 - Icon Ridge Hardware & Fixing Technology Catalog

Chemical products for construction

Power-seal Hydro

• High-grade, 1-component, water-swelling, polyurethane based
sealant Your Advantage / Benefit
• Outstanding, controlled swelling properties up to 450% in water
• Powerdicht Hydro shrinks to its initial volume when completely dry Easy to use 1-component compound
and swells up again on renewed contact with water Water-tight and gas-tight up to 5 bar
• Excellent resistant to chemicals Adapts perfectly to the material to be sealed
Permanently flexible once hardened
Meets the requirements of the following standards:
• DVGW VP-601
Usage: Application
• Suitable for concrete, meal and hard PVC
• The adhesion surfaces must be clean, free of dust and grease, water
impermeable and capable of bearing load For sealing pipe and duct leadthroughs in concrete
For fixing expanding joint sealing tape in concrete
• Standing water, cement slurry and other adhesion-reducing
substances must be removed For sealing joints and penetrations in concrete
• Fill both ends of the concrete leadthrough with 5 cm of Powerdicht
Hydro. If necessary, wrap the pipe with PUR cord in the middle of the
leadthrough
• Before hardening clean with whit spirit followed by mechanical
cleaning
• The sealant hardens from the outside towards the inside, low
temperatures and/or low humidity delay hardening
Swelling properties:
• 24 h: 150 – 200%
• 72 h: approx. 300%
• 144 h: 400 – 450%
Compared to original volume

Technical Data
Based on: 1-C polyurethane
Consistency: Stable paste
Skin formation: approx. 120 min
Hardening speed: 1 – 2 mm in the first 24 h
Shore A hardness (DIN53505): 15 ± 5
Density (DIN 53 479): approx. 1.37 g/ml
Tensile strength (DIN 53504): 0.60 N/mm²
Elongation (DIN 53504): > 800 %
Temperature resistance: -30 °C to +90 °C
Storage (dry,
Article No. Article Description QTY between +5 °C and +25 °C): 9 months
6880 30 310 C(310ML)POWER SEAL.HYDRO e 6 Building material class: B2 (normally flammable)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 372
037