Page 380 - Icon Ridge Hardware & Fixing Technology Catalog

Chemical products for construction

Joint Sealing INTERIOR

Product description:
• Joint Sealing INTERIOR ia a high-quality, plasto-elastic, one-
component sealant on polyacrylate basis for standard window
sealing acc. to RAL or ÖNORM on the inside
• Low water permeability
• Very good processability
• Solvent and silicone-free
• Fade-resistant, weather- and UV-resistant
• Waterproof after curing
• Can be covered with plaster or wallpaper
Field of application:
• Specially adjusted for the sealing system in window installation, in
connection with the products Joint Sealing Foam SOFT and Joint
Sealing EXTERIOR S / EXTERIOR P
• Permanent, air-tight inside sealing of joints between masonry and
door or window frames
• For joints with low load between masonry, concrete, plaster and
window sills, as well as roller shutter boxes
• For the sealing of metal joints, metal seams and overlaps in metal
and apparatus construction industry, as well as in climatisation and
ventilation technology
Processing instructions:
• The surfaces to be bonded must be sound, clean, dust- and
grease-free
• Not suitable for glass, metals with risk of corroding, enamel, ceramic,
underwater joint sealings, bitumen, tar, marble and natural stones
• Pre-coat highly porous surfaces with a mixture of 1/3 of Joint Sealing
INTERIOR and 2/3 of water and let allow to dry for at least 60 min.
• In case of doubt, perform a contact test
• Even with water before skin formation

Technical Data
Basis: polyacrylate
Skin formation: * approx. 30 min
Processing temperature: +5 °C to +40 °C
Temperature resistance: -20 °C to +80 °C
Max. admissable total transformation
(DIN EN ISO 11600): 15 %
Water vapour diffusion resistance factor (µ): approx. 7,186
Sd-value (at 8mm joint depth) approx. 57.5m
Colour: white
Building material class (DIN 4102 part 1): B2

* Measured acc. to standard climate DIN EN ISO 291 with
23°C/50% r.h. These values can vary due to environmental factors
such as temperature, humidity and type of substrate.

Article No. Article Description QTY
6880 3 310 1 K(310ML)JOINT SEAL. INTERIOR 25

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 380