Page 381 - Icon Ridge Hardware & Fixing Technology Catalog

Chemical products for construction

Joint Sealing EXTERIOR P

Attention:
• this version can be painted over
Product description:
• Joint Sealing EXTERIOR P is a high quality, neutrally curing, flexible
hybrid-based sealant for the standard window sealing acc. to RAL or
ÖNORMon the outside
• Can be painted over very well
• Weather- and UV-resistant, fade-resistant
• Very good processability starting at 0 °C
• Solvent-, isocyanate- and silicone-free
Application:
• Specially adjusted for the sealing system in window installation, in
connection with the products Joint Sealing Foam SOFT and Joint
Sealing INTERIOR
• All common building joints, as well as joints in high-building acc. to
DIN 18540
• Connection joints between window / door frames and masonry
• Tensionless bonding of window sealing strips
• Tension compensating expansion joints between construction
materials with very different expansive characteristics
• Very good adhesion on all common building substrates such as e.g.
concrete, gas concrete, hard PVC, wood, metals, glass-fibre
reinforced plastics, etc.
• Not suitable for PE, PP, PTFE, silicones, soft PVC, butyl rubber,
EPDM rubber
Processing instructions:
• The surfaces to be bonded must be sound, clean, dust-and
grease-free
• Pre-coat highly porous substrates with silicone primer
• In case of doubt, perform contact test
• Even with silicone smoother before skin formation

Technical Data
Basis: Hybridpolymer
Skin formation: * approx. 20 min
Hardening speed: * 3 mm in the first 24 hrs
Processing temperature: 0 °C to +40 °C
Temperature resistance: -40 °C to +90 °C
Shore A-hardness (DIN 53505): 30 +/- 5
Max. admissable total transformation
(DIN EN ISO 11600): 25 %
Water vapour diffusion resistance
factor (µ): approx. 991
Sd-Value (at 8mm joint depth) approx. 7.9m
Colour: white
Building material class (DIN 4102 part 1): B2

*Measured acc. to standard climate DIN EN ISO 291 with 23°C / 50 %
r.h. These values can vary due to environmental factors such as
temperature, humidity and type of substrate.

Article No. Article Description QTY
6880 3 310 3 K(290ML)JOINT SEAL.EXTERIOR P 25
6880 3 600 3 B(600ML)JOINT SEAL.EXTERIOR P 12

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 381