Page 679 - Icon Ridge Automotive & Truck Catalog (1)

Vehicle products

Service Procedures

Are you uncertain what steps you need to follow on vehicles with tyre pressure monitoring systems in the course of the service procedure?
No problem! With the operating procedure below you will be fromle to master tyre servicing in no time.

Tyre Service

Vehicle without TPMS Vehicle with TPMS

Indirect measuring system Direct measuring system
(measurable via ABS, no TPMS sensor (TPMS sensor installed in the wheel)
installed in the wheel)

Procedures as before check system status Outlay and processes dependent on
observe instructions for possible system
wheel/tyre
inflate tyre to pressure specified
save current tyre pressures as the new
nominal value;

Test drive (learning phase)
approx. 15 min > 20 km/h

Vehicle with direct TPMS

Check system status before starting work

Generally speaking:
use only system-compatible sensors;
check state of sensor battery with diagnostic and programming
tool
if necessary, mount service kit
inflate tyre to manufacturer’s specification

Self-learning Learning via vehicle menue Learning with diagnostic and
programming tool

Carry out procedure according to specifications of the vehicle or system
manufacturer
activate sensor
record sensor ID
encode sensor position
save preset pressures

Test drive (learning phase) System learns by itself after approx. 15 min at > 20 km/h

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 679