Page 831 - Icon Ridge Maintenance & Service Catalog

Chemical products

Drilling and cutting foam

• Highly adherent cutting oil foam for targeted application to the area
to be worked on
• Lubricates and cools tools while drilling, tapping and threading,
lathing, milling, sawing, etc.
• Extends tool life
• For work on vertical surfaces and overhead
• Compatible with all water-miscible cooling lubricants
• Soluble in water, can be washed off with clean water
• Free of chlorine, sulphur and mineral oils
• Biodegradable
• For machining all alloyed and non-alloyed metals and cast irons, as
well as copper, copper alloys and all stainless steel alloys

Article No. Article Description
6580 5815 DRILL AND CUTTING FOAM 400ML

Drilling and Cutting Emulsion - Water Soluble

• EP Cooling lubricant that can be mixed with water (EP = Extreme
Pressure for heavy duty machining)
• High performance cutting and cooling emulsion
• Greater corrosion-protection
• Extremely resistant against microorganisms
• Longer tool life
• Application concentration: 5 – 20%
• Silicone-free
• Also suitable for use in CNC machines
Application:
• Preparation of operation emulsion: carefully add and stir the
emulsion to drinking water or use a automatic mixing device.

Article No. Article Description
6580 5810 (5L)DRILLING&CUTT.EMULSION WS
Suitable spout:
• 5 l: 6000 0023

Thread-Cutting Oil DVGW

• DVGW approved
• Mineral oil-free, for potable water pipes
• Compatible with all commercially available thread-cutting machinery,
even at high cutting speeds
• Also suitable as a spray oil for drilling, tapping, turning, milling, etc.
• Colour: red

Article No. Article Description
6580 5851 THREAD-CUT.FLUID DVGW 300ML
6580 5855 THR.CUT.FLUID-M. WAT.SAFE 5L
Suitable spout: • 5 l: 6000 0023

6580 5851 6580 5855

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 831