Page 489 - Icon Ridge Industrial Tools Catalog
P. 489
Lathe tools \ Technical introduction–turning - ISO turning
Cemented carbide grades ISO N
Negative ground and polished ISO N type non-ferrous metals!
Advantages:
Extremely positive cutting geometry
Polished chip grooves
Innovative chip breaker
Wide infeed range
range of applications
application coating
01 05 10 15 20 25 30 35 40 45
ISO Uncoated
N OHW7315
OHW7315
Application The high-performance one in non-ferrous metals!
High-performance variety for machining in non-ferrous metals with high hardness and wear resistance and low tendency
to stick for use in good to unfavourable operating conditions.
Application
Substrate K15
Grain size 1 µm
Type of coating
Coating thickness
Operating conditions Good-unfavourable
cutting speed
Hardness
Toughness
Insert MN2-
Extremely positive cutting optimised for non-ferrous metalworking with chip breaker!
Advantages Very positive chip breaker optimised for wide infeed range and high surface qualities
Low cutting forces and good chip breakage
Wide clamping range for smoothing and moderate machining
Optimised geometry for long-chipping non-ferrous metals
Stability
Cutting forces
Surface quality
N
16
a ( mm ) p 6,3 10 MN2
4 MN2
2,5
1,6
1
0,63
0,4
0,25
16°
0,16
0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1 1,6 2,5
f ( mm )
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 489
Availability subject to country specific rules and regulations.
