Page 552 - Icon Ridge Industrial Tools Catalog

Lathe tools \ Technical introduction–CBN turning

700
600
Cutting speed → → → 500 V c V c V c V c V c V

400
c
V
c
300
V c
200
100
Feed f: 0.02-0.25 f: 0.04-0.25 f: 0.05–0.25 f: 0.05-0.4 f: 0.06-0.5 f: 0.08-0.35 f: 0.1-0.35 f: 0.12-0.35 Feed
Cutting depth a p: 0.02-0.4 a p: 0.03-0.4 a p: 0.06-0.4 a p: 0.06-0.4 a p: 0.08-0.5 a p: 0.08-0.4 a p: 0.1–0.4 a p: 0.12–0.4 Cutting depth
ABC-10 ABC-10
Cutting conditions Smooth to medium interrupted cut Cutting conditions
Machining parameters for CBN cutting materials - ABC-10
Grey cast iron GG20 - GG25 - GG30 - GG40

Cutting edge design (negative chamfer)
V c: m/min
A B C D E F G H
1750
1500 V c V
Cutting speed → → → 1250 c V c V c V c V c V c

1000

750
500 V c

300
Feed f: 0.02-0.25 f: 0.04-0.25 f: 0.05–0.25 f: 0.05-0.4 f: 0.06-0.5 f: 0.08-0.35 f: 0.1-0.35 f: 0.12-0.35 Feed
Cutting depth a p: 0.02-0.25 a p: 0.03-0.3 a p: 0.06-0.4 a p: 0.06-0.4 a p: 0.08-0.5 a p: 0.08-0.4 a p: 0.1–0.4 a p: 0.12–0.4 Cutting depth
ABC-10 ABC-10
Cutting conditions Smooth to strongly interrupted cut Cutting conditions

Cutting edge design for CBN cutting materials

The ATORN cutting edge range includes various
distinct cutting edge designs. The standard range in- A
cludes different chamfers on the cutting edge. These
include sharp-edge (A) to high chamfer versions B
(G), depending on the application. The use of high C
chamfers on the cutting edge can achieve very good
surfaces, but the forces are increased. Sharp-edge D Cutting forces Cutting edge stability
variants are the appropriate choice for long projec- <Rz
tions with unstable conditions. E
F
G

Source: Hahn+Kolb Werkzeuge GmbH
552 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.