Page 29 - Icon Ridge Painting, Plastering & Drywall Catalog
P. 29

Chemical products for construction

         Foam Handheld 1K-PU


         • Moisuture-hardening one-component-polyurethane foam to fill and
           insulate window joints, window sill joints, pipe feedthroughs, wall
           joints, wall breakthroughs and hollow spaces
         • General building authority approval
         • CFC-free
         Processing instruction:
         • Shake can well before use (approx. 20x)
         • Moistening/spraying of surfaces improves the adhesion on and
           hardening as well as the cell structure
         • Adhesion on concrete, stone, metal and wood. No adhesion on
           polyethylene, silicone, PTFE and grease.
         • Use primer if surface is porous or priming
         • Contact tests are recommended

          Technical Data
          Build.mat.class acc. to DIN 4102, part 1:  B2
          Max. foam volume:                approx. 40 l
          Foam up:                         approx. 150 %
          Non-adhesive*:                   after approx. 10 min
          Can be cut*:                     after approx. 40 min
          Processing temperature for tin,
          environment and surface          +5 °C to +25 °C
          Temperature resistance (hardened)  -40 °C to +90 °C
          Shelf life:                      12 months
         * at 20 °C and 60 % relative humidity

          Article No.  Article Description             QTY
          6800 8105  1K-PU FOAM HANDHELD 750ML          12



         Well Foam 1K-PU


         • To seal and connect wells or concrete well casings
           - Saves time-consuming mortar setting
           - Faster, time-efficient working
         • Resistant against fuel, oil, water and bacteria and acids found in soil
           - individual range of use
         • CFC-free
           - Environmentally-friendly
         • Test certificate for water tightness
         Processing instructions:
         • May not be used for construction above ground


          Technical Data
          Fire class acc. to DIN 4102, part 1:  B3
          Foam yield:                     approx. 40 l of foam
          Non-adhesive:                   after approx. 10 min
          Can be cut:                     after approx. 40 min
          Processing temperature for tin,
          Environment and surface:        +5 °C to +25 °C
          Temperature resistance (hardened):  -40 °C to +90 °C
                                          (+120 °C max. 1 h)
          Shelf life:                     12 months

          Article No.  Article Description             QTY
          6800 8132  1K-PU WELL FOAM G.A. 750ML         12
          6800 8133  1K-PU WELL FOAM - PIPE 750ML       12















        Technical data subject to change.
        Availability subject to country specific rules and regulations.   www.iconridge.com        Source: Theo Förch GmbH & Co. KG                    29
   24   25   26   27   28   29   30   31   32   33   34