Page 30 - Icon Ridge Painting, Plastering & Drywall Catalog

Chemical products for construction

Gun foam 1K-PU B1

• Flame resistant, moisture-hardening 1-component polyurethane
foam
• General building authority approval
• Can be dosed exactly without drips from the assembly gun
• Hardly inflammable between massive mineral or metallic materials,
joint depth and width up to 40 mm
Processing instructions:
• Shake can well before use (approx. 20x)
• Slight moistening / spraying of surfaces improves the adhesion and
hardening as well as the cell structure
• Adhesion on concrete, stone, metal and wood. No adhesion on
polyethylene, silicone, PTFE and grease
• Use primer if surface is porous or absorbent
• Contact tests are recommended

Technical Data
Build. mat. class acc. to DIN 4102, part 1: B1
Foam yield: approx. 45 l
Can be cut: after approx. 40 mins.
Processing temperature for can,
environment and substrate): +5°C to +25°C
Temp. resistant (hardened): -40°C to +90°C
Colour: pink
Shelf life: 12 months
* at 20 °C and 60 % relative humidity
Article No. Article Description QTY
6800 0538 1K-PU GUN FOAM B1 750ML 12

Perimeter adhesive foam

• 1-part polyurethane adhesive foam for mounting rigid PS foam
boards as perimeter insulation in basements
• Excellent heat insulation
• Exceptional dimensional stability
• Exceptional adhesion of insulation panels to conventional surfaces,
such as concrete, bitumen sheeting or bitumen thick coatings
• Quick and easy delivery and handling with a foam gun
Usage instructions:
• Contact surfaces must be sound, clean, dry, dust-free and
grease-free
• Screw the can onto the gun with the valve facing upwards and shake
vigorously
• Place the bottom row of insulating panels on a firm surface
• Apply lines of adhesive vertically, spaced approx. 25 cm apart, on the
wall or panel
• Allow adhesive to sink in (between 2 and 10 min), firmly press panel
onto basement wall
• Seal open joints in the insulation with adhesive
• The final strength of the adhesive is achieved by the pressure ap-
plied by the backfilled soil. The backfilling should take place within 14
days of applying the adhesive.
• Not suitable for applications in groundwater areas (due to pressing
water)
Technical Data
Construction material class in
accordance with DIN 4102 Part 1: B2
Basis: Polyurethane
Colour: Mint green
Tack-free time of surface: After approx. 10 min
Cuttable: After approx. 30 min
Coverage: Approx. 13 m² wall area
Working temperature: +5 °C to +35 °C
Temperature resistance: -40 °C to +90 °C
Shelf life: 12 months

Article No. Article Description QTY
6800 8109 INSULAT.BOARD-ADHESIVE750ML e 12

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 30