Page 51 - Icon Ridge Painting, Plastering & Drywall Catalog

Roof, Wall, Facade

Plaster Primer

Water-dilutable,ready-to-use quartz primer for outdoors and
indoors
• White, good to work with and efficient special primer for regulating
the absorption behaviour of strongly absorbent substrates
• Primer prepares the substrate for subsequent finishing plasters
• Prevents drying out of subsequent mineral or organically based
finishing plasters
Usage instructions:
• Apply by painting, rolling or spraying
• Depending on the absorption behaviour, can be diluted up to a
proportion of 2 parts primer to 1 part water
• Working temperature: +5 to +30 °C object temperature
• Storage: cool but frost-free
• Drying time: approx. 24 hours
• Coverage: 0.25 kg/m²

Article No. Article Description QTY
8769 1 20 KG<20>PLASTER PRIMER 20

Primer for Absorbent Substrates

Priming for plasters
• The primer is a solvent-free, film-forming coating which reduces and
compensates for the absorbency of the substrate
• The drying out of subsequently applied plaster is prevented and the
formation of shrinkage cracks is restricted
Usage instructions:
• Mixing proportion with water depending on the absorbency of the
substrate: 1:3 to 1:8
• The dilution must be set so that a primed surface does not glisten
• With strongly absorbent substrates, dilutions between 1:3 and 1:5
are recommended; for less absorbent materials, dilutions from 1:5 to
1:8
• Storage: frost-free at below +30 °C, protected from incident light and
sunlight
• Shelf life: 12 months
• Coverage: approx. 150 ml/m²
• Drying time: depending on weather, 2 – 24 hours
• Clean the working equipment with water immediately after use

Article No. Article Description QTY
8769 3 15 LTR<15>PRIMER FOR ABSORB.SUBS. 15

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 51