Page 52 - Icon Ridge Painting, Plastering & Drywall Catalog

Roof, Wall, Facade

Concrete Contact

• Bonding course for concrete
• Betonkontakt is a solvent-free coating for providing adhesion for
plasters on concrete
• Reduces the substrate absorbency and hence the evaporation and
the formation of shrinkage cracks in the subsequently applied plaster
• Reduces the detrimental reaction between concrete and plaster
(ettringite formation)
• For better recognition of already treated surfaces, Betonkontakt has
a reddish colour
Usage instructions:
• Substrate must be stable and free from grease, oil and dust. The
surface should be air-dried and have no damp spots. Moisture acting
at the rear must be excluded
• The Betonkontakt must be dried before plastering
• Clean the working equipment with water immediately after use
• Storage: frost-free at below +30 °C, protect from sunlight and
incident light
• Shelf life: 12 months
• Coverage: approx. 0.3 kg/m²
Indoors:
• Dilute Betonkontakt with water at most in a proportion of 2:1; apply
with brush, roller or plastering machine
Outdoors:
• Mix Betonkontakt with 20 % (by weight) Portland cement 35F and to
achieve a brushable consistency, dilute with a maximum of 50 %
water

Article No. Article Description QTY
8769 2 20 KG<20>CONCRETE CONTACT 20

Reinforcing Mortar

• Dry mortar comprising mineral binding material and
aggregates
• Suitable for bonding full thermal insulation panels and for embedding
reinforcing fabric
Usage instructions:
• Bonding: Apply the adhesive and reinforcing mortar to the insulating
panel in a point-bead process and place the panel on the substrate
in a sliding motion
• Coating/embedding: Apply the adhesive and reinforcing mortar to
the insulating panels approx. 2 mm thick and embed the reinforcing
fabric while keeping it flat. Then apply a further 2 mm of mortar
• Coverage: Approx. 5 kg/m² (bonding), approx. 5 kg/m² (embedding
fabric or coating)
• Avoid drying out too quickly
• Do not process if air or substrate temperatures are below +5 °C or
over +30 °C
• Do not process in sunlight or wind that is too strong
• Do not mix with other products
• The surface must be stable, dry and clean
• Storage: Can be stored dry for approx. 6 months
• 1 palette = 1,260 kg

Article No. Article Description QTY
8769 4 25 1 KG<30>REINFORCING MORTAR GREY b 1260
8769 4 25 2 KG<30>REINFORCING MORTAR WHITE b 1260
8769Y 4 25 1 KG<1260>REINF.MORTAR GREY PAL. 1260
8769Y 4 25 2 KG<1260>REINF.MORTA.WHITE PAL. 1260

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 52