Page 400 - Icon Ridge Presents ATORN

Modular milling tools \ Angular milling cutter and plunge mill
Plunge mill for non-ferrous metals and plastics with straight shank
For milling cutter indexable inserts VPGT 1604.., VCGT 2205..

Application:  Robust support design for high-performance L2 R
Ideal for processes such as excavation and plunge milling
milling in aluminium and plastics with the highest  With internal cooling
usage values. The robust and precision-ground  Clamping screw tightening torque (indexable d D
VPGT/VCGT reversible tip is ideal for plunge milling insert) M4 = 5.2 Nm, M5 = 8 Nm
without a pilot bore thanks to its optimised shape L3
and cutting geometry. Excellent chip removal thanks Advantage:
to polished cutting faces and large chip spaces;  Low cutting forces L1
enables high cutting rates with minimal built-up edge  Large corner radii for reduced wear
formation.
 Very high material removal rate
Execution:  Highest feed rates possible
 With straight shank  Also ideal for cutting plastics 19°
25°
90°

l 2

Plunge mill for
non-ferrous Clamping screw
metals and for indexable
plastics with inserts
straight shank
D (mm) L2 (mm) L1 (mm) d (mm) max. ap (mm) Number of Suitable for in- 16032... 16108...
cutting edges dexable inserts Ident. No. Ident. No.
(PCS)
25 40 200 20 14 2 VPGT 1604.. 025 125
32 50 220 25 15 2 VCGT 2205.. 032 126
Prod. Gr. 155

Indexable milling insert VCGT, VPGT
For indexable insert cutter no. 16032

Delivery:
Box quantity: 10 pieces
Surface Uncoated Coated
Carbide type HW4410 HC4410
Material to be processed Non-ferrous Non-ferrous
metal
metal
Suitable for material group P
Suitable for material group M
Suitable for material group N  
Suitable for material group K
Suitable for material group S
Suitable for material group H
ISO name Knife edge length (mm) Edge radius (mm) 16113... 16113...
Ident. No. Ident. No.
VPGT 1604012-ALM 16.6 1.2 042 043
VCGT 220530-ALM 22.1 3 044 045
Prod. Gr. 155

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 400

0495_EN_2018_KERN[21847525]-V.indd 496 12/17/2018 3:32:46 PM