Page 432 - Icon Ridge Presents ATORN

Turning tools \ CN.. ISO indexable inserts, negative

CN.. Indexable inserts - for longitudinal turning and facing
For longitudinal turning and facing

CNMG smoothing negative
ISO P

Carbide type HC7610 HC7620
Machining conditions for indexable insert Good Medium
Vc in steel  110-420 m/min 80-350 m/min
Vc in cast iron  110-320 m/min 60-290 m/min
ISO name min./max. ap f min./max. 17863... 17863...
Ident. No. Ident. No.
CNMG 120404-FP 0.1-1.5 mm 0.04-0.2 mm/U 098 099 FP
CNMG 120408-FP 0.2-2 mm 0.08-0.25 mm/U 100 101
Prod. Gr. 156 FP fi nishing

CNMG Wiper negative
ISO P

Carbide type HC7620
Machining conditions for indexable insert Medium
Vc in steel  80-350 m/min
Vc in cast iron  60-290 m/min
ISO name min./max. ap f min./max. 17863...
Ident. No.
CNMG 120408-WP 0.7-4 mm 0.15-0.5 mm/U 200 WP
Prod. Gr. 156
WP – wiper

CNMG medium machining negative
ISO P

Carbide type HC7620 HC7630 HC7610
Machining conditions for indexable insert Medium Unfavourable Good
Vc in steel  80-350 m/min 60-220 m/min 110-420 m/min
Vc in cast iron  60-290 m/min 110-320 m/min
ISO name min./max. ap f min./max. 17863... 17863... 17863...
Ident. No. Ident. No. Ident. No.
CNMG 102 103 - MP
120404-MP 0.5-4 mm 0.1-0.18 mm/U -
CNMG 0.15-0.25 105 108 104 MP medium machining
120408-MP 0.6-5 mm mm/U
CNMG
120412-MP 0.8-4 mm 0.18-0.3 mm/U 161 162 160
CNMG
160608-MP 1-7 mm 0.15-0.3 mm/U 170 - - - -
CNMG
160612-MP 1.2-7 mm 0.2-0.4 mm/U 171 - - - -
Prod. Gr. 156

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 432

0546_EN_2018_KERN[21847826]-m.indd 547 12/17/2018 3:33:22 PM