Page 436 - Icon Ridge Presents ATORN

Turning tools \ SN.. ISO indexable inserts, negative

SN.. Indexable inserts - for longitudinal turning and facing
For longitudinal turning and facing

SNMG medium machining negative
ISO P

Carbide type HC7610 HC7620 HC7630
Machining conditions for indexable insert Good Medium Unfavourable
Vc in steel  140-340 m/min 80-280 m/min 60-220 m/min
Vc in cast iron  180-290 m/min 120-260 m/min
ISO name min./max. ap f min./max. 17867... 17867... 17867...
Ident. No. Ident. No. Ident. No.
SNMG 0.6-5 mm 0.18-0.4 mm/U 010 011 012 MP
120408-MP
SNMG 1-5 mm 0.2-0.4 mm/U - - 017 018
120412-MP
Prod. Gr. 156 MP medium machining
SNMG rough machining negative
ISO P

Carbide type HC7620 HC7630
Machining conditions for indexable insert Medium Unfavourable
Vc in steel  80-280 m/min 60-220 m/min
Vc in cast iron  120-260 m/min
ISO name min./max. ap f min./max. 17867... 17867...
Ident. No. Ident. No.
SNMG 120408-RP 1-6 mm 0.2-0.5 mm/U 021 022 RP
SNMG 120412-RP 1-6 mm 0.25-0.65 mm/U 023 - -
Prod. Gr. 156
RP rough machining
SNMG medium machining negative
ISO M

Carbide type HC7520 HC7530
Machining conditions for indexable insert Medium Unfavourable
Vc in stainless steel  150-240 m/min 130-200 m/min
Vc in special alloys  30-60 m/min 20-50 m/min
ISO name min./max. ap f min./max. 17867... 17867...
Ident. No. Ident. No.
SNMG 120408-MM 0.8-3 mm 0.18-0.3 mm/U 600 - - MM
SNMG 120412-MM 0.8-3 mm 0.18-0.3 mm/U - - 601
Prod. Gr. 156
MM medium machining

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 436

0558_EN_2018_KERN[21847847]-q.indd 559 12/17/2018 3:33:24 PM