Page 439 - Icon Ridge Presents ATORN

Turning tools \ WN.. ISO indexable inserts, negative

WN.. Indexable inserts - for longitudinal turning and facing
For longitudinal turning and facing

WNMG smoothing negative
ISO P

Carbide type HC7620
Machining conditions for indexable insert Medium
Vc in steel  90-350 m/min
Vc in cast iron  120-290 m/min
ISO name min./max. ap f min./max. 17869...
Ident. No.
WNMG 060404-FP 0.1-1.5 mm 0.04-0.2 mm/U 002 FP
WNMG 080404-FP 0.1-1.5 mm 0.05-0.2 mm/U 006
WNMG 080408-FP 0.2-2 mm 0.08-0.25 mm/U 008
Prod. Gr. 156 FP fi nishing

WNMG Wiper negative
ISO P

Carbide type HC7610 HC7620
Machining conditions for indexable insert Good Medium
Vc in steel  110-350 m/min 90-350 m/min
Vc in cast iron  140-240 m/min 120-290 m/min
ISO name min./max. ap f min./max. 17869... 17869...
Ident. No. Ident. No.
WNMG 080412-WP 1.5-4 mm 0.25-0.7 mm/U 026 046 WP
WNMG 080408-WP 0.8-3 mm 0.2-0.55 mm/U 044 045
Prod. Gr. 156
WP wiper

WNMG medium machining negative
ISO P

Carbide type HC7620 HC7610 HC7630
Machining conditions for indexable insert Medium Good Unfavourable
Vc in steel  90-350 m/min 110-350 m/min 60-220 m/min
Vc in cast iron  120-290 m/min 140-240 m/min
ISO name min./max. ap f min./max. 17869... 17869... 17869...
Ident. No. Ident. No. Ident. No.
WNMG 0.5-4 mm 0.16-0.25 010 - - - - MP
060404-MP mm/U
WNMG 0.6-4 mm 0.18-0.35 013 - - - -
060408-MP mm/U MP medium machining
WNMG 0.5-4 mm 0.16-0.25 016 015 017
080404-MP mm/U
WNMG 0.6-5 mm 0.18-0.4 mm/U 022 021 023
080408-MP
WNMG 1-6 mm 0.2-0.4 mm/U 027 - - - -
080412-MP
Prod. Gr. 156

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 439

0566_EN_2018_KERN[21847859]-l.indd 567 12/17/2018 3:33:17 PM