Page 184 - Icon Ridge Sanitary-Heating-Air Catalog

Chemical products

Leak Detector

• DVGW-tested
• Enables quick and easy checking and locating of leaks in gas
canisters, pipes, hoses, valves, etc.
• High detection sensitivity
• Suitable for use from 0 °C to + 50 °C
Application:
• Spray into pressurised systems from a distance of 30 to 50 cm
• Formation of bubbles identifies leaks
• Rinse any remaining leak locating fluid with clean water after use

Article No. Article Description
6730 0800 LEAK DETECTOR 400ML
6730 0805 LEAK DETECTOR 5L

Suitable spout:
• 5 l: 6000 0020
6730 0800 6730 0805

Humid Leak Detector

• White powder spray for quick locating of wind, moisture and dust
leaks
• Determines the leak exactly
• Allows the detection of oil, water and fuel leaks at vehicle bodies,
radiators, engine blocks, gearboxes, power steerings, fuel lines,
pipes, pumps, and door, window and trunk seals, etc.
• Easy to clean away after application
• Safe use on rubber and vinyl
Application:
• Spray Humid Leak Detector on the possible leak
and let dry for a few minutes. Testing area must be clean and dry.
• Water, oil and fuel leave clearly visible traces in the powder
• When used for rubber seals as e.g. at doors, trunk lids spray to the
opposite side.
After ventilating, close the door, trunk lid etc. carefully. After re-
opening the door, trunk lid you can see possible leaks by the lacking
powder marks on the seals.
• In case of leaks in the vehicle underbody or trunk
spray Humid Leak Detector to eventually open seams, cracks or
openings.
The powder ingresses through smallest cracks or holes to the inside.

Article No. Article Description
6730 0810 HUMID LEAK DETECTOR 400ML

Leakage Finder Frost-Proof

• For maintenance and control of gas and compressed air systems in
the area of production, refinery, heating technique, hospital
technique, refrigeration engineering etc.
• Suitable for cryogenic gases
• Even the smallest leaks are indicated reliably by bubble formation
• Allows punctual spraying by controlled actuation of the spray head
• DVGW tested
• Non-inflammable propellant, non-corrosive, pH-neutral
• Suitable up to -15 °C

Article No. Article Description
6890 500 LEAK.FIND.FROST-PROOF 400ML 5*

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 184