Page 189 - Icon Ridge Sanitary-Heating-Air Catalog
P. 189

Chemical products for construction

         Boiler Cleaner Oil


         • For problemfree, fast cleaning of oil-powered boilers
         • Cleans even stubborn, non-combustible coatings such as sulphate
         • Lessens the corrosion sensitivity and the creation of new coatings
         • Improves the heat transfer and so saves energy
         Usage instructions / general information:
         • Slightly foaming
         • Do not spray on burner and electrical components
         • Ensure sufficient chimney draught during use
         • Store frostfree
         Application:
         1. Switch off burner and open boiler room
         2. Spray the dirty inner surfaces of the boiler with FÖRCH Oil Boiler
         Cleaner and allow to react for a short time. Then heat the boiler well.
         This process will have removed the most stubborn soot and sulphate
         coatings.
         3. Once the boiler cooled down, open the boiler room again and hoover
         the remaining residue

          Article No.  Article Description             QTY
          6890 410    BOILER-CLEANER OIL   500ML       e 12
          6620 6091   AEROSOL-ADAPTER 60CM               1




         Boiler Cleaner Gas


         • For problemfree, fast cleaning of gas-powered boilers
         • Ceans even stubborn, non-combustible coatings such as sulphate
         • Lessens the corrosion sensitivity and the creation of new coatings
         • Improves the heat transfer and so saves energy
         Usage istructions / general information:
         • Slightly foaming
         • Do not spray on burner and electrical components
         • Ensure sufficient chimney draught during use
         • Store frostfree
         Application:
         1. Switch off burner and open boiler room
         2. Spray the dirty inner surfaces of the boiler with FÖRCH Oil Boiler
         Cleaner and allow to react for a short time. Then heat the boiler well.
         This process will have removed the most stubborn soot and sulphate
         coatings.
         3. Once the boiler cooled down, open the boiler room again and hoover
         the remaining residue.

          Article No.  Article Description             QTY
          6890 610    BOILER-CLEANER GAS    500ML      e 12
          6620 6091   AEROSOL-ADAPTER 60CM               1





























     Technical data subject to change.
     Availability subject to country specific rules and regulations.   www.iconridge.com  Source: Theo Förch GmbH & Co. KG           189
   184   185   186   187   188   189   190   191   192