Page 41 - Icon Ridge Sanitary-Heating-Air Catalog

Building Services

Material Constants STRUT:

Modulus of elasticity E Shear modulus G Poisson’s ratio μ Coefficient of thermal expansion αT
210.000 N/m² 81.000 N/m² 0,3 0,000012 1/K
Calculation method:
The load-bearing capacity values for the bending load (primarily static load) are calculated according to the theory of elasticity,
taking their own weight into account. To name but a couple of examples, these calculations use the material and cross-section constants. When
calculating the load-bearing capacity values, the permissible steel stress of 160 N/mm² and the maximum deflection of L/150 are not exceeded.
The deflection indicated must be assessed for visual acceptability on a case-by-case basis!

Load:
If several different individual loads in variable distances affect a single-span beam (crossbar),
they can be added and considered an estimated individual load positioned centrally.
For enhanced safety, it is advisable to use U-shaped brackets!
In case of high loads, “push-through installation” is recommended!

Mounting on the ceiling and the wall:
The necessary fixing elements (screws and dowels) must be calculated
individually and must be suitable for the load with mounting rails!

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 41