Page 7 - Icon Ridge Sanitary-Heating-Air Catalog

Building Services

Refrigerant Pipe Clamps 13 mm

• Excellent insulating and mechanical properties
• Bead-reinforced double screw pipe clip with 4-fold welded
connecting nut
• Single-sided, quick-release safety fastener for quick, practical
installation
• Pipe support made of elastomer rubber with a PIR core (PIR =
polyisocyanurate – better insulating properties and fire protection
properties, as well as more pressure-resistant and dimensionally
stable than polyurethane)
• For fastening thermally insulated pipes made of steel, copper,
stainless steel or plastic.
• Can be used with elastomer rubber insulation – adheres to the pipe
insulation, forming a vapour-tight seal
• Matched to the increasing insulation thicknesses of cold rubber
shapes
Note on usage:
• The contact surfaces of the refrigerant pipe clamp must be aligned
horizontally during assembly to prevent tensile and compressive
forces.

Technical Data
External External C B H h Max.perm. Fa,z 2)
Ø Impe.Ø Insula. Clamp
CU FE FE Thickn. Spacing 1)
Article No. Article Description QTY mm mm mm mm mm mm m N
8614 13 12 COLD PIPE CLA. 13X 12MM M8/M10 32 12 - - 13 75 60 38 - 40
8614 13 15 COLD PIPE CLA. 13X 15MM M8/M10 24 15 1/4“ 13.5 13 75 60 37 2.00 50
8614 13 18 COLD PIPE CLA. 13X 18MM M8/M10 24 18 3/8“ 17.2 13 75 69 40 2.25 60
8614 13 22 COLD PIPE CLA. 13X 22MM M8/M10 24 22 1/2“ 21.3 13 83 71 42 2.75 75
8614 13 28 COLD PIPE CLA. 13X 28MM M8/M10 16 28 3/4“ 26.9 13.5 92 77 46 3.00 75
8614 13 35 COLD PIPE CLA. 13X 35MM M8/M10 12 35 1” 33.7 13.5 92 81 48 3.50 150
8614 13 42 COLD PIPE CLA. 13X 42MM M8/M10 12 42 1 1/4” 42.4 14 102 93 55 3.75 200
8614 13 48 COLD PIPE CLA. 13X 48MM M8/M10 12 - 1 1/2” 48.3 14 109 98 57 4.25 275
8614 13 54 COLD PIPE CLA. 13X 54MM M8/M10 12 54 - 54.0 14 117 102 59 - 300
8614 13 60 COLD PIPE CLA. 13X 60MM M8/M10 10 - 2” 60.3 15 117 108 62 4.75 475
8614 13 64 COLD PIPE CLA. 13X 64MM M8/M10 10 64 - 63.5 15 123 112 63 4.75 475
8614 13 70 COLD PIPE CLA. 13X 70MM M8/M10 16 70 - 70.0 15 138 116 62 5.50 600
8614 13 76 COLD PIPE CLA. 13X 76MM M8/M10 12 76.1 2 1/2” 76.1 15 138 123 69 6.00 750
8614 13 89 COLD PIPE CLA. 13X 89MM M8/M10 8 88.9 3” 88.9 15 153 140 76 6.00 1,100
8614 13 102 COLD PIPE CLA. 13X102MM M8/M10 10 - 3 1/2” 101.6 15.5 169 154 84 6.00 1,300
8614 13 108 COLD PIPE CLA. 13X108MM M8/M10 10 108 - 108.0 15.5 172 157 86 6.00 1,300
8614 13 114 COLD PIPE CLA. 13X114MM M8/M10 10 114 4” 114.3 15.5 178 163 89 6.00 1,700
1) according to DIN 1488 for steel pipe (the specifications of the pipe
manufacturer must be taken into account)
2) Load index (Fa,z) is restricted to the pipe support
• Pipe clamp material: Electrolytically galvanised steel
• Pipe support material: Elastomer rubber with PIR core and encased
in moisture barrier
• Thermal conductivity: 0.036 W/(m×K)
• Water vapour permeability in accordance with DIN EN 13469: >
8,000 µ
• Fire behaviour according to DIN 4102: B2
• Density of PIR core: 120 kg/m³
• Usable temperature range: from -50 °C to +105 °C
• Does not contain CFCs, HCFCs, formaldehyde or cadmium

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 7