Page 8 - Icon Ridge Sanitary-Heating-Air Catalog

Building Services

Refrigerant Pipe Clamps 19 mm

• Excellent insulating and mechanical properties
• Bead-reinforced double screw pipe clip with 4-fold welded
connecting nut
• Single-sided, quick-release safety fastener for quick, practical
installation
• Pipe support made of elastomer rubber with a PIR core (PIR =
polyisocyanurate – better insulating properties and fire protection
properties, as well as more pressure-resistant and dimensionally
stable than polyurethane)
• For fastening thermally insulated pipes made of steel, copper,
stainless steel or plastic.
• Can be used with elastomer rubber insulation – adheres to the pipe
insulation, forming a vapour-tight seal
• Matched to the increasing insulation thicknesses of cold rubber
shapes
Note on usage:
• The contact surfaces of the refrigerant pipe clamp must be aligned
horizontally during assembly to prevent tensile and compressive
forces.

Technical Data
C B H h Max. perm. Fa,z 2)
Ext. Ø FE Ext. Ø insul. clamp
CU inch FE thickn. spacing 1)
Article No. Article Description QTY mm mm mm mm mm mm m N
8614 19 12 COLD PIPE CLA. 19X 12MM M8/M10 26 12 - - 19 83 72 43 - 40
8614 19 15 COLD PIPE CLA. 19X 15MM M8/M10 24 15 1/4“ 13.5 19 92 76 46 2.00 50
8614 19 18 COLD PIPE CLA. 19X 18MM M8/M10 24 18 3/8“ 17.2 19.5 92 76 46 2.25 60
8614 19 22 COLD PIPE CLA. 19X 22MM M8/M10 12 22 1/2“ 21.3 19.5 92 76 49 2.75 75
8614 19 28 COLD PIPE CLA. 19X 28MM M8/M10 12 28 3/4“ 26.9 20 102 89 52 3.00 75
8614 19 35 COLD PIPE CLA. 19X 35MM M8/M10 12 35 1” 33.7 20 109 94 55 3.50 150
8614 19 42 COLD PIPE CLA. 19X 42MM M8/M10 12 42 1 1/4” 42.4 21.5 117 102 59 3.75 200
8614 19 48 COLD PIPE CLA. 19X 48MM M8/M10 12 - 1 1/2” 48.3 21.5 123 111 63 4.25 275
8614 19 54 COLD PIPE CLA. 19X 54MM M8/M10 16 54 - 54.0 21.5 129 119 64 - 300
8614 19 60 COLD PIPE CLA. 19X 60MM M8/M10 12 - 2” 60.3 22 198 123 69 4.75 475
8614 19 64 COLD PIPE CLA. 19X 64MM M8/M10 12 64 - 63.5 22 198 126 71 4.75 475
8614 19 70 COLD PIPE CLA. 19X 70MM M8/M10 12 70 - 70.0 22 144 192 73 5.00 600
8614 19 76 COLD PIPE CLA. 19X 76MM M8/M10 18 76.1 2 1/2” 76.1 22 153 198 77 5.50 750
8614 19 89 COLD PIPE CLA. 19X 89MM M8/M10 14 88.9 3” 88.9 22 162 150 83 6.00 1,100
8614 19 102 COLD PIPE CLA. 19X102MM M8/M10 8 - 3 1/2” 101.6 22.5 178 163 89 6.00 1,300
8614 19 108 COLD PIPE CLA. 19X108MM M8/M10 8 108 - 108.0 22.5 187 172 94 6.00 1,300
8614 19 114 COLD PIPE CLA. 19X114MM M8/M10 8 114 4” 114.3 25.5 187 175 95 6.00 1,700
8614 19 133 COLD PIPE CLA. 19X133MM M8/M10 2 133 - 133.0 25.5 233 200 107 6.00 2,000
8614 19 139 COLD PIPE CLA. 19X139MM M8/M10 2 - 5” 139.7 26 233 204 110 6.00 2,000
8614 19 159 COLD PIPE CLA. 19X159MM M8/M10 2 159 - 160.0 26 255.5 223 120 6.00 2,200
8614 19 168 COLD PIPE CLA. 19X168MM M8/M10 2 - - 168.3 26 256 229 122 6.00 2,200
8614 19 219 COLD PIPE CLA. 19X219MM M16 2 - - 219.1 26 345.3 290 158 6.00 5,000
1) according to DIN 1488 for steel pipe (The specifications of the pipe
manufacturer must be taken into account)
2) Load index (Fa,z) is restricted to the pipe support
• Pipe clamp material: Electrolytically galvanised steel
• Pipe support material: Elastomer rubber with PIR core and encased
in moisture barrier
• Thermal conductivity: 0.036 W / (m*K)
• Water vapour permeability in acc. with DIN EN 13469: > 8,000 µ
• Fire behaviour according to DIN 4102: B2
• Density of PIR core: 120 kg/m³
• Usable temperature range: from -50 °C to +105 °C
• Does not contain CFCs, HCFCs, formaldehyde or cadmium

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 8