Page 89 - Icon Ridge Sanitary-Heating-Air Catalog

Drilling, Milling, Tapping and Threading

Hammer drill with SDS-max mounting shaft

• Suitable for all hammer drills with SDS-max mounting shaft or Hilti
TE-Y
• 6-edge drilling head with centering tip
- Max. drilling progress with optimum service life
- No hooking in when hitting reinforcement
- Low-vibration drilling
• Extra deep big volume spiral
- Quick dust transport
- No deflagration
• Solid skin and tough core due to shot-peened surface
- High abrasion resistance at minimum risk of breakage
• HM-plates with special solder, soldered
- Temperature resistance up to +1,100°C
• For all known materials e.g. bricks, natural stone, concrete,
reinforced concrete, granite
• Ø 12 – 14 mm: 2-edge-Dual-drilling head
Application:
• From a total length of 540 mm pre-drill a hole with minimum depth of
150 mm using a shorter drill bit with the same Ø

Article No. Article Description QTY
5635 15 340 SDS-MAX TRIMAX HADR.15X340/200 1
5635 22 540 SDS-MAX TRIMAX HADR.22X540/400 1
5635 22 920 SDS-MAX TRIMAX HADR.22X920/780 1
5635 24 340 SDS-MAX TRIMAX HADR.24X340/200 1
5635 25 540 SDS-MAX TRIMAX HADR.25X540/400 1
5635 25 690 SDS-MAX TRIMAX HADR.25X690/550 1
5635 28 540 SDS-MAX TRIMAX HADR.28X540/400 1
5635 30 540 SDS-MAX TRIMAX HADR.30X540/400 1
5635 30 690 SDS-MAX TRIMAX HADR.30X690/550 1
5635 32 540 SDS-MAX TRIMAX HADR.32X540/400 1

(Ø x total length / working length mm)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 89