Page 61 - Icon Ridge Safety Products Catalog

Working Security

Nitrile glove / leather cuff, partly coated

• micro-granulated
• finely knit fabric: mesh (gauge) 13 elastic high performance fibres
(polyethylene) without annoying seam inside the hand, thus offe-
ring better comfort and flexibility
• microgranualted nitrile partial coating, 3/4 dipped (tropic), 1/4 bre-
athable back of the hand
• back of the hand 3/4 liquid-proof
• best abrasion and tear resistance (4)
• cutting resistance (3)
• very good dry grip
• better oil / wet grip thanks to microgranulation
• oil / grease-resistant
• free from solvents, water-based
• DMF-free (Dimethylformamide)
• silicone-free
• puncture-free - no skin contact with the coating, sweat is absorbed,
lower slipping ratio, more comfortable
• tear-proof safety cuff made from leather to protect the wrist and
making it easy to put on and take off
• protection against mechanical dangers according to EN 388
Technical Data
Article No. Article Description QTY standard: EN 388
5405 5 202 7 NITR.GLOVE/LE.CUFF PAR.COAT.7 12 abrasion resistance: 4
5405 5 202 8 NITR.GLOVE/LE.CUFF PAR.COAT.8 12 cut resistance: 3
5405 5 202 9 NITR.GLOVE/LE.CUFF PAR.COAT.9 12 tear resistance: 4
5405 5 202 10 NITR.GLOVE/LE.CUFF PAR.COAT.10 12 puncture resistance: 2

Nitrile Gloves Blue

• Breathable
• Microgranulated
• Fine knitted carrier fabric: mesh number (Gauge) 15 and Lycra (Elas-
tane) of approx. 3%, thus very high wearing comfort and flexibility
• Microgranulated nitrile partly coated (palmfit) with breathable back of
the hand
• Excellent dry grip
• Improved oil grip due to microgranulation
• Oil and grease resistance
• Solvent-free, water-based
• DMF-free (Dimethylformamide)
• Silicone-free
• Puncture resistance - no skin contact with the coating, improved we-
aring comfort
• Protection against mechanical hazards according to EN 388
Technical Data
Article No. Article Description QTY Standard: EN 388
5405 5 200 7 GLOVES NITRILE BLUE 7 5* 12 Abrasion resistance: 4
5405 5 200 8 GLOVES NITRILE BLUE 8 5* 12 Cutting resistance: 1
5405 5 200 9 GLOVES NITRILE BLUE 9 5* 12 Tear propagation resistance: 2
5405 5 200 10 GLOVES NITRILE BLUE 10 5* 12 Puncture resistance: 1

Technical data subject to change. Source: Theo Förch GmbH & Co. KG 61
Availability subject to country specific rules and regulations. www.iconridge.com