Page 66 - Icon Ridge Safety Products Catalog

Working Security

Nitrile Gloves, Long

• Resistant against many solvents and chemicals
• Excellent abrasion resistance
• Palm with diamond pattern for good grip
• Inner velour finish made of 100 % cotton
• Material thickness: approx. 0.38 mm
• Length: approx. 330 mm
• Food tested
• Protection against mechanical hazards according to DIN EN 388,
against bacterialogical contamination according to DIN EN 374/2
and against chemical hazards according to DIN EN 374/3
• Antistatical according to EN 1149

Technical Data
Article No. Article Description QTY Standard: EN 388
5405 51 7 CHEMIC.PROT.GLOV.NITRILE 7.5 12 Abrasion resistance: 4
Cutting resistance: 1
5405 51 8 CHEMIC.PROT.GLOV.NITRILE 8.5 12
5405 51 9 CHEMIC.PROT.GLOV.NITRILE 9.5 12 Tear propagation resistance: 0
5405 51 10 CHEMIC.PROT.GLOV.NITRILE 10.5 12 Puncture resistance: 1

Chemicals - Protective Gloves, PVC

• Resistant to most acids, alkaline solutions, salt solutions and oils in
general
• Very good abrasion resistance
• Inner velour finish from 100% cotton
• Material thickness: approx. 1.2 mm
• Length: approx. 350mm
• Protection against mechanical dangers according to DIN EN 388
against bacteriological contamination according to DIN EN 374 / 2
and against chemical dangers according to DIN EN 374 /3

Technical Data
Article No. Article Description QTY Standard: EN 388
5405 54 8 CHEMICAL PROTEC. GLOVES PVC 8 12 Abrasion resistance: 4
5405 54 9 CHEMICAL PROTEC. GLOVES PVC 9 12 Cut resistance: 1
5405 54 10 CHEMICAL PROTEC. GLOVES PVC 10 12 Tear resistance: 2
5405 54 11 CHEMICAL PROTEC. GLOVES PVC 11 12 Puncture resistance: 1

Chemical protective gloves, natural latex

• resistant to water-based chemicals
• good abrasion resistance
• palm with diamond pattern for good grip
• 100% inner velour finish
• material thickness: approx. 0.80 mm
• length approx. 320 mm
• protection against mechanical dangers according to DIN EN 388,
against bacteriological contamination according to DIN EN 374 / 2
and against chemical dangers according to DIN EN 374 /3

Technical Data
standard: EN 388
Article No. Article Description QTY abrasion resistance: 3
5405 95 8 CHEM.PROT.GLOV.NAT.LATEX 8.5 12 cut resistance: 1
5405 95 9 CHEM.PROT.GLOV.NAT.LATEX 9.5 12 tear resistance: 2
5405 95 10 CHEM.PROT.GLOV.NAT.LATEX 10.5 12 puncture resistance: 1

Technical data subject to change. Source: Theo Förch GmbH & Co. KG 66
Availability subject to country specific rules and regulations. www.iconridge.com