Page 19 - Industrial Tools Catalog (2)

Workpiece clamping \ Lathe chucks and accessories
Jaw extractor device BAV

Application: Execution:
For 3-jaw lathe chucks for unscrewing soft top jaws ƒ For bridging a large clamping range
and block jaws as well as hardened interchangeable ƒ For adjusting the clamping diameter with spiral
jaw grips. The unscrewing device is mainly used for rings or by turning the adjustment slider.
turning internal unscrewing and external screwing of
soft jaws on 3-jaw chucks.
Lathe chuck Ø (mm) 200 250 250 315
Outer Ø (mm) 176 215 244 290
Internal Ø (mm) 110 135 162 208
Max. Suspension area 170-260 mm 215-285 mm 240-315 mm 290-360 mm
outer Ø min/max A
Max. Suspension area 35-125 mm 70-140 mm 100-175 mm 145-215 mm 1 B
inner Ø min/max J
22472... Ident. No. 010 020 030 040 7 D 2
○
○
○
○
Prod. Gr. 203 J
A
7 3
4
6 5
① Standard jaw position
② Housing with spiral ring
③ Knurl
④ Adjustment jaw
⑤ Jaw position reversed
⑥ Mounting screw
➆ Mounting range
Safety spanner, spring-loaded, with ejector
For lathe chucks with square drive
Application: Execution:
The key has to be firmly pressed into the chuck ƒ Ref. no. 080-170 with sliding sleeve, for lathe
drive and held there until the clamping procedure is chucks with female square drive.
complete. When the pressure is relieved, the key is
automatically ejected.

Ident. No. 090–140

For chuck Ø 100 mm | 110 125 mm | 140 160 mm 200 mm 250 mm 315 mm | 350 400 mm
mm
mm
mm
For lathe chucks with inner square 8 9 10 11 12 14 17
(mm)
Length (mm) 130 130 160 160 160 200 250
22471... Ident. No. 080 090 100 110 120 140 170
●
●
●
●
○
●
●
Prod. Gr. 203
Safety wrench
For lathe chucks with square drive
Application: Execution:
The key has to be firmly pressed into the chuck ƒ Ref. no. 210-219 with ejector pin, for lathe chucks
drive and held there until the clamping procedure is with male square drive (tapered rod chuck)
complete. When the pressure is relieved, the key is
automatically ejected.
For chuck Ø 160 mm 200 mm 250 mm 315 mm 400 mm
For lathe chucks with external square
(mm) 10 12 14 17 19
Length (mm) 140 160 220 230 250
22471... Ident. No. 210 212 214 217 219
●
○
●
●
●
Prod. Gr. 202

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 819
Availability subject to country specific rules and regulations.