Page 51 - Industrial Tools Catalog (2)
P. 51
Workpiece clamping \ Technical introduction – quick-action clamps
AMF quick-action clamp
The features of our quick-action clamp at a glance
the characteristics of our quick-action clamp at a glance
ergonomic 2-component handle
safety clamping piece with finger protection
protection against the loss of pressure screws
stainless steel rivets
removable rubber cap
Ergonomic 2-component handle Stainless-steel rivets
Safety clamping piece with finger Removable rubber cap
protection
Protection against the loss of pressure
screws
① Ergonomic 2-component handle with a high degree of
1 operating comfort due to large hand surface. The grippy
surface made of soft components is connected with the
hard base material sitting firmly on the clamp.
② Safety clamp with finger protection and integrated
stop to which there is no access.
③ Protection against the loss of pressure screws.
For subsequent insertion of pre-assembled pressure
2 5 screws.
④ Pressure screw (8.8) can be quickly adjusted using the
nut washer in tensioner arm.
6
3 ⑤ Stainless-steel rivets in case-hardened bushings. All
bearings greased, for durable, consistent functionality.
4 ⑥ The opening angle can be changed by pressing in a stop
pin.
7 ⑦ Pressure screw with removable rubber cap.
Quick-action clamp with coloured handles available
on request.
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 851
Availability subject to country specific rules and regulations.
