Page 48 - Industrial Tools Catalog (2)

Mechanical clamping elements \ Mechanical clamping elements
Type Long type standard standard Long type standard
DIN - 508 508 - 508
Nominal dimension of 22 24 28 28 36
groove (mm)
Sliding block width a (mm) 21.7 23.7 27.7 44 35.6
Thread dimension d M20 M22 M24 M24 M30
Length e (mm) 35 40 44 88 54
Height h (mm) 28 32 36 36 44
Sliding block height k 14 16 18 18 22
(mm)
26195... Ident. No. 290 100 110 310 130
●
●
●
●
●
Prod. Gr. 260
Nut blanks for T slots
Application: ƒ Ref. no. 720- 810 nut blanks made of heat-treated
for clamping in T-grooves. steel 0.35-0.45% C, without thread, for self-manu-
facture of nuts with non-standard thread.
Execution:
ƒ Ref. no. 010- 130 tempered, strength class 10 Notes:
Ref. no. 26195060 and 26195100 do not correspond
to DIN 508

a

h
k
e

Nominal dimension of 8 10 12 14 16 18 20 22 24 28
groove (mm)
Sliding block width a (mm) 7.7 9.7 11.7 13.7 15.7 17.7 19.7 21.7 23.7 27.7
Height h (mm) 10 12 14 16 18 20 24 28 32 36
Length e (mm) 13 15 18 22 25 28 32 35 40 44
Sliding block height k (mm) 6 6 7 8 9 10 12 14 16 18
26195... Ident. No. 720 730 740 750 760 770 780 790 800 810
●
●
●
●
○
●
●
●
●
●
Prod. Gr. 260
Nuts
For Rhombus T-slots
Application: ƒ The reduced contact surface in the T-groove
For inserting sliding block from above through the results in a lower load capacity compared with
neck of the T-groove. comparable DIN 508 sizes.
Execution: Notes:
ƒ Tempered Aluminium version on request.

Nominal dimension of groove 12 14 16 18 20 22 28 28
(mm)
a (mm) 11.7 13.7 15.7 17.7 19.7 21.7 27.7 27.7
d M10 M12 M14 M16 M16 M20 M20 M24
h (mm) 14 16 18 20 24 28 36 36
k (mm) 7 8 9 10 12 14 18 18
e (mm) 18 22 25 28 32 35 44 44
Property class 8 8 6 6 8 6 8 6
26194... Ident. No. 010 020 030 040 050 070 075 080
●
●
●
●
●
●
●
●
Prod. Gr. 260
Source: Hahn+Kolb Werkzeuge GmbH
848 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.