Page 554 - Industrial Tools Catalog (2)

General requirements \ Holding magnets and small magnets

Outer Ø (mm) 10 13 16 20 25 32 40 50 63 80 100
Height (mm) 11.5 11.5 11.5 13 15 15 18 22 30 34 42
Height of the base (mm) 4.5 4.5 4.5 6 7 7 8 10 14 18 22
Adherence strength (N) 5 12 30 40 49 90 130 220 300 550 900
Thread dimension M3 M3 M3 M3 M4 M4 M5 M6 M8 M10 M12
Thread length (mm) 7 7 7 7 8 8 10 12 16 16 20
51145... Ident. No. 500 510 520 530 540 550 560 570 580 590 600
●
●
●
●
●
●
●
●
●
●
●
Prod. Gr. 591
Flat magnetic grips
With bore hole and countersink
Application: ƒ Surface galvanised
Auxiliary materials with universal application during ƒ Magnetic shielding
clamping, assembling, lifting and welding operations, ƒ With bore hole and countersink
and for installing in devices etc. ƒ Operating temperature up to 100°C
Execution: Advantage:
ƒ With hard ferrite core ƒ Fastening option from inside with a screw
Outer Ø (mm) 16 20 25 32 40 50 63 80
Height (mm) 4.5 6 7 7 8 10.5 14 18
Bore Ø (mm) 3.5 4.2 5.5 5.5 5.5 6.5 6.5 6.5
Adherence strength (N) 30 40 49 90 130 180 290 540
51146... Ident. No. 720 730 740 750 760 770 780 790
●
●
●
●
●
●
●
●
Prod. Gr. 591
Magnetic bar grips
Round, with an AlNiCo core
Application: Execution:
Auxiliary materials with universal application during ƒ With AlNiCo core
clamping, assembling, lifting and welding operations, ƒ Magnet encased in steel
and for installing in devices etc. ƒ Operating temperature up to 450°C
ƒ Fastening option: Press in, shrink or glue in place
ƒ Smooth exterior surface with h6 fit tolerance
Outer Ø (mm) 6 8 10 13 16 20 25 32 40 50
Height (mm) 10 12 16 18 20 25 30 35 45 50
Adherence strength (N) 6 10 14 27 36 72 90 100 130 200
51148... Ident. No. 500 510 520 530 540 550 560 570 580 590
●
●
●
●
●
●
●
●
●
●
Prod. Gr. 591
Magnetic bar grips
Round, with an AlNiCo core
Application: Execution:
Auxiliary materials with universal application during ƒ With AlNiCo core
clamping, assembling, lifting and welding operations, ƒ Magnet encased in steel
and for installing in devices etc. ƒ Operating temperature up to 450°C
ƒ With female thread
ƒ Fastening option: Screws
Outer Ø (mm) 6 7 10 13 16 20 25 32
Height (mm) 20 20 20 20 20 25 35 40
Adherence strength (N) 1.7 4 8.5 12 20 50 115 200
Thread dimension M3 M3 M4 M4 M4 M6 M6 M8
Thread length (mm) 5 5 7 7 5 7 9 9
51150... Ident. No. 800 810 820 830 840 850 860 870
●
●
●
●
●
●
●
●
Prod. Gr. 591

Source: Hahn+Kolb Werkzeuge GmbH
1356 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.