Page 75 - FINISHING TOTAL

Technical Sheet

GEALUX FINISH PW 200

Chemical Nature: combination of hot melt waxes and
oils with low affinity to water
Active Substance: approx. 99%
Melting Point: approx. 60°C
Ionic Charge: non ionic
Aspect: yellow solid
Utilization: wax and oil leathers

PROPERTIES
GEALUX FINISH PW 200 is a wax developed to provide pull-up effect
on leather. Due to its chemical nature, it has low affinity with water
and polar solvents. Therefore, it is recommended for wax and oil type
leathers. Besides not lowering the waterproof results, it also
increases in the Maeser and Bally performance. It is recommended
to be applied at 75°C in rollercoating machine, with loads between
10 and 12 gr/SQFT, according to the desired final effect. It can be
used pure or combined with the oil GEOFAT FINISH HF. GEALUX
FINISH PW 200 can be iron or felt polished in order to increase its
dark effect and uniformity.

For further information, please consult our technical department.
The above text is only informative.