Page 76 - FINISHING TOTAL

Technical Sheet

GEALUX FINISH WS

Chemical Nature: combination of waxes and fatliquors
for hot application
Active Substance: approx. 95%
Melting Point: approx. 60°C
Ionic Charge: anionic
Aspect: yellowish solid
Utilization: leathers with pull-up effect

PROPERTIES
GEALUX FINISH WS is a combination of wax and fatliquor developed
to give pull up effect on leather. Used in pull up finishes, it provides a
good darkening effect, however, without hardening the leathers too
much. Its application is recommended at 85°C in thermodot machines.
The load depends on the desired article, between 80 to 120g/m2.
After the application, it is recommended to let the leathers rest from
one day to the other. Afterwards, it can be polished hot and, if
necessary, applied finish. GEALUX FINISH WS can be combined with
other waxes and fatliquors of GEALUX FINISH and GEOFAT FINISH
lines.

For further information, please consult our technical department.
The above text is only informative.