Page 58 - 2022FittingsCatalog

THREAD-TO-CONNECT TEST POINT COUPLINGS

Diagnostic test couplings are used to monitor pressures in hydraulic
systems and can also be used to vent hydraulic systems and draw Part Number Thread Size
fluid samples for contamination measurement. Galvanized carbon TG08… DIRECT GAUGE COUPLER
steel construction with Buna-N (Nitrile) seals allow for working
temperatures up to 125°C (257°F) for all hydraulic and mineral TG08-04 1 ⁄4"
oils. Rated to 9100 psi, these couplers feature an M16 X 2.0
thread-to-connect body and are interchangeable with Stauff Test
20, Parker EMA3, Cejn Press-Check, Voss Point Measuring, and
Tompkins Test Point designs.
TG08BH… UNVALVED HOSE BULKHEAD GAUGE ADAPTER
Part Number Thread Size
4 T16… COUPLER WITH NPT THREAD TG08BH-04 1 ⁄4"

T16-02 1 ⁄8"
Quick Couplings T00… UNVALVED HOSE CONNECTOR
1 ⁄4"
T16-04

T00
T11… COUPLER WITH O-RING BOSS THREAD

T11-02 5 ⁄16-24
T11-04 7 ⁄16-20
T11-06 9 ⁄16-18 T00BH… COUPLER WITH BULKHEAD HOSE ADAPTER

T00BH

T36… COUPLER WITH BSPP THREAD
T36-02 1 ⁄8-28
T36-04 1 ⁄4-19
T36-06 3 ⁄8-19
C790 TEST POINT QUICK
COUPLINGS
T38… COUPLER WITH BSPT THREAD
Occasionally, you may find push-to-connect test point couplings
on North American made equipment. Our C790 Series will allow
T38-02 1 ⁄8-28
T38-04 1 ⁄4-19 you to adapt your micro-bore hose assemblies to fit these
couplings. C790 couplings meet the ISO 15171-1 interchange
standard, are fitted with buna-N (nitrile) seals and feature zinc-
plated carbon steel construction. The flush face design allows
for minimal air inclusion and fluid loss while the quick release
T73… COUPLER WITH METRIC DIN 2353 THREAD sleeve allows for easy push-to-connect operation.
LL Series
T73LL-04 M8 x 1.0 Temperature Range: -20°C (-4°F) to 100°C (212°F).
T73LL-06 M10 x 1.0 Interchange: Parker PD, Aeroquip FD90, Holmbury DTP.
L Series Working
T73L-06 M12 x 1.5 Part Number Body Size Thread Size Pressure
T73L-08 M14 x 1.5 C791… PUSH-TO-CONNECT COUPLER WITH NPT THREAD
T73L-10 M16 x 1.5
C791-02 1 ⁄8" 1 ⁄8" 5800 psi
C791-04 1 ⁄8" 1 ⁄4" 5800

For Test Point Micro-Bore assemblies, C792… PUSH-TO-CONNECT NIPPLE WITH NPT THREAD
adapters, crimp couplings, and more, 1 ⁄8" 1 ⁄8"
see our Pulsar Hydraulics Catalog C792-02 1 ⁄8" 1 ⁄4" 5800
5800
C792-04
or visit www.greenlinehose.com

C794… PUSH-TO-CONNECT NIPPLE WITH ORB THREAD
C794-04 1 ⁄8" 7 ⁄16-20 5800
C794-06 1 ⁄8" 9 ⁄16-18 5800

56