Page 3 - Mountain Transport - Tipper Operations

Mid UK Recycling Driver Risk Assessment & Safe System of Work

Section 1 Risk Index Section 2 Section 3 Section 4 Risk Index

Description of the hazards and Without What/ Arrangements required to adequately control Person responsible for With Control
risks Control Who is at the risk implementing and Measures
risk monitoring the controls
S x P = RI S x P = RI
Falls from Height including Trained drivers with a drivers CPC qualification.
Access & Egress Trained on 3 points of contact. Adequate access The Driver, Fleet General
and egress steps in place with handle to ensure Manager and Transport
5 4 H Drivers 3 points of contact. Employees to take extra care Manager to ensure the 5 3 H
rules are applied
Employees when accessing and egressing, look at the
condition of the ground before stepping out of
the vehicle.
Falling Objects Check load is evenly distributed. Use pull over
strap or automatic sheet to sheet the trailer in The Driver, Fleet General
Manager and Transport
line with the SSoW below. Check area for loose
Manager to ensure the
4 3 H Drivers debris. Always wear correct PPE including a rules are applied 5 1 L
Employees safety helmet.

Collision or impact with Site inductions will take place before a new
mobile plant / Other Vehicles driver enters a new site. including site safety The Driver, Fleet General
plan and traffic management plans. Pedestrian Manager and Transport
Drivers
5 3 H walkways and crossing areas to be in place. Manager to ensure the 5 1 L
Employees
Drivers are instructed not to leave their vehicle rules are applied
cabs in loading areas.

Struck by Moving Object Driver to stand clear of the doors when opening.
(Rear Doors on Trailer) Back doors to be secured when open to prevent The Driver, Fleet General
any unforeseen movement with the locking Manager and Transport RASSoW 11Q
Drivers
5 3 H Employees handles held in a 12 o’clock position. This Manager to ensure the 5 1 L Tipper Operations
Crushing/ trapping, impact procedure will be covered in Driver training with rules are applied
from falling objects. company trainer. Driver to read the trailer
Manufacturer’s instructions. Trained and
competent staff. Drivers to read and sign the
safe system of work listed below. Review Dates:
(V2) – 06-01-2025 / Next R/D 05-01-2026
Review by Steve Bennett
Approved by General Manager – Rick Legg