Page 19 - _00'230213 BROCHURES ONLY

Specifications

Glasfloss Phoenix Series PR-5 Ring Panels, Sleeves and Links are engineered for light dust loading appli-
cations. PR-5 shall be 100% non-woven green and white polyester. Two distinct plies of media shall be uti-
lized, each being more dense than the one preceding it. The progressively dense fiber orientation of each
> PR-5
media layer enables the small micron size particles to depth load within the filter. The PR-5 shall have a
nominal thickness of 1/2". An internal wire frame shall be thermally sealed within the filter. There shall be
sufficient media overlap to ensure a positive seal between the filter and the holding frame, eliminating air by-

Glasfloss Phoenix Series PR-10 Ring Panels, Sleeves and Links are engineered for moderate dust loading
applications. PR-10 shall be 100% non-woven green and yellow polyester. Three distinctly different plies
of media shall be utilized, each being more dense than the one preceding it. The progressively dense fiber
orientation of each media layer enables the small micron size particles to depth load within the filter. The
> PR-10 PR-10 shall have a nominal thickness of 1”. An internal wire frame shall be thermally sealed within the filter.
There shall be sufficient media overlap to ensure a positive seal between the filter and the holding frame,
eliminating air bypass. The PR-10 Ring Panels shall be rated MERV 8 when tested in accordance with the
ANSI/ASHRAE 52.2 Test Standard.

Glasfloss Phoenix Series PR-20 Ring Panels, Sleeves and Links are engineered for heavy dust loading ap-
plications. PR-20 shall be 100% non-woven green and white polyester. Three distinctly different plies of
media shall be utilized, each being more dense than the one preceding it. The progressively dense fiber ori-
entation of each media layer enables the small micron size particles to depth load within the filter. The PR-
> PR-20 20 shall have a nominal thickness of 2”. An internal wire frame shall be thermally sealed within the filter.
There shall be sufficient media overlap to ensure a positive seal between the filter and the holding frame,
eliminating air bypass. The PR-20 Ring Panels shall be rated MERV 8 when tested in accordance with the
ANSI/ASHRAE 52.2 Test Standard.

Smaller Fiber
Blend on
Downstream
Air Flow
Glasfloss Phoenix Series Poly-Rings, Sleeves,
and Links shall be constructed utilizing multiple
%
layers of 100 non-woven polyester media. The
progressively dense fiber orientation of each
media layer enables the small micron size par- In-Line
ticles to depth load within the filter. Allowing the Tackifier on
particles to depth load will enhance the life of the Air Leaving Side
filter.

Larger Fibers Progressively
on Air Entering Dense Fiber Blend
Side

“Serving You With Locations Throughout The Nation”
Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.
www.glasfloss.com · (214) 741-7056