Page 27 - MKRS Ring lock User Guide Manual Blue Redesign PDF_Neat

RINGLOCK

SAFETY MANUAL & USER GUIDES

Corner Solutions—Without Cantilever Platforms

CORNER SOLUTIONS

A corner can be created in many different ways. Please see the below examples for
the most common solutions, when dealing with an internal or external corner it is
imperative that a 3 part side protection is in place at all times. It is also important that
scaffolds are tied to the adjacent structure and have sufficient bracing.
CORNER SOLUTIONS WITHOUT INTERNAL CANTILEVER PLATFORMS

This is the most basic layout for
a corner. All Ledgers are present
at the deck level and an internal
Standard is used at the corner.
A square bay is erected for
the corner which can be either
internal or external.

The outside Ledger at platform
level has been replaced with
a Console Bracket. In order to
create the Guardrail a Standard is
attached to the wedge casting on
the Console Bracket. This minimizes
the number of components in
comparison to the layout above.

A fly by return is created by
joining the scaffolds together
anywhere along the span of the
adjacent bay. By using a Truss
Ledger at the Plank level the
Planks can lock into the Truss
Ledger at any point.

Diagonal Bracing and Edge Protection removed
for clarity.

27