Page 44 - MKRS Ring lock User Guide Manual Blue Redesign PDF_Neat

RINGLOCK

SAFETY MANUAL & USER GUIDES

Connection to a Ledger—(Cont’d.)

• Do not clip to:
— Ringlock Braces.
— Standards not supported by two or more Ledgers attached to the
same rosette.
— Puncheons or cantilevered components.
— Pipework, plant guardrails, cable racks etc.

8. Refer to “Safety Harness Connection Guideline” for suitable/appropriate harness
locations.

9. Anchor points should always be as high as possible. However, this is not
always practical in scaffolding which is usually built from the ground up. Our
recommendation is that where no higher anchor point is available you should clip
to the Ledger immediately below your feet. There is sufficient space between the
Ledger and the platform to clip on with a safety harness carabiner.

WHERE TO ATTACH YOUR SHOCK ABSORBING LANYARD

Below represents where you can safety attach a Scaffold hook/snap hook. Connection
locations shown in Red are not suitable for fixing to. The anchorage points shown in
Green are to support Shock Absorbing Lanyard fall arrest equipment.

44