Page 24 - Broadband Catalog 2018

Coaxial Cable Torquing & Termination Tools

Torque Wrenches

TW-AH Series

7/16″ Angled Head Torque Wrenches
• Audible clicking sounds indicate when the connector is torqued to the correct setting
TW-AH
• Rugged steel construction provides durability
• Wrench head is angled at 20°
• High-visibility yellow cushioned grip reduces hand strain

TW-AH
TW-AH-S
Angled torque wrench equipped with a tap port re-threader on the opposite end
TW-AH-B

Basic angled torque wrench
TW-AH-516
TW-AH-S
Angled torque wrench with a speed head to quickly tighten without removing the wrench
TW-AH-516

TW-AH-IT Angled torque wrench equipped with a 5/16″ socket on the opposite end for tightening tap
face plates

TW-AH-IT
Angled torque wrench equipped with a "F" connector insertion tool on the opposite end

TW-AH Series Ordering Guide

WRENCH TYPE SERIES TORQUE WRENCH SIZE MODEL PART # LENGTH WEIGHT
20 in/lb (2.26 Nm) 7/16″ (11.1 mm) TW 207-AH 36435
Angled Head with 25 in/lb (2.82 Nm) 7/16″ (11.1 mm) TW 257-AH 38840
Tap Port Re-Threader TW-AH 30 in/lb (3.39 Nm) 7/16″ (11.1 mm) TW 307-AH 36437 7.125″ (181 mm) 5.6 oz (159 g)
40 in/lb (4.51 Nm) 7/16″ (11.1 mm) TW 407-AH 36438
10 in/lb (1.13 Nm) 7/16″ (11.1 mm) TW 107-AH-B 43380
12 in/lb (1.36 Nm) 7/16″ (11.1 mm) TW 127-AH-B 43400
20 in/lb (2.26 Nm) 7/16″ (11.1 mm) TW 207-AH-B 37900
Basic Angled Head TW-AH-B 6″ (152 mm) 5.0 oz (142 g)
25 in/lb (2.82 Nm) 7/16″ (11.1 mm) TW 257-AH-B 37903
30 in/lb (3.39 Nm) 7/16″ (11.1 mm) TW 307-AH-B 37901
40 in/lb (4.51 Nm) 7/16″ (11.1 mm) TW 407-AH-B 37902
20 in/lb (2.26 Nm) 7/16″ (11.1 mm) TW 207-AH-S 37995
25 in/lb (2.82 Nm) 7/16″ (11.1 mm) TW 257-AH-S 38837
Angled Speed Head TW-AH-S 5.75″ (146 mm) 4.9 oz (139 g)
30 in/lb (3.39 Nm) 7/16″ (11.1 mm) TW 307-AH-S 37997
40 in/lb (4.51 Nm) 7/16″ (11.1 mm) TW 407-AH-S 37998
20 in/lb (2.26 Nm) 7/16″ (11.1 mm) TW 207-AH-516 37905
Angled Head with TW-AH-516 25 in/lb (2.82 Nm) 7/16″ (11.1 mm) TW 257-AH-516 38839 6″ (152 mm) 5.0 oz (142 g)
5/16″ Socket 30 in/lb (3.39 Nm) 7/16″ (11.1 mm) TW 307-AH-516 37906
40 in/lb (4.51 Nm) 7/16″ (11.1 mm) TW 407-AH-516 37907
20 in/lb (2.26 Nm) 7/16″ (11.1 mm) TW 207-AH/IT 36645
Angled Head with 25 in/lb (2.82 Nm) 7/16″ (11.1 mm) TW 257-AH/IT 37411
"F" Connector Insertion Tool TW-AH-IT 30 in/lb (3.39 Nm) 7/16″ (11.1 mm) TW 307-AH/IT 36648 7.125″ (181 mm) 5.6 oz (159 g)
40 in/lb (4.51 Nm) 7/16″ (11.1 mm) TW 407-AH/IT 36649

24 25