Page 29 - EASA_AR100-2015_0815 APEX_IESCO_Neat

EASA AR100-2020 Recommended Practice - Rev. August 2020 Bibliography, Page 1

Bibliography
All references are to the revision dates listed below.

ANSI/ABMA Standard 7-1995: Shaft and Housing Fits IEEE Standard 56-2016: IEEE Guide for Insulation Main-
for Metric Radial Ball and Roller Bearings (Except Ta- tenance of Electric Machines. Institute of Electrical and
pered Roller Bearings) Conforming to Basic Boundary Electronics Engineers, Inc. New York, NY, 2016.
Plans. American Bearing Manufacturers Asso- IEEE Standard 95-2002: IEEE Recommended Practice for
ciation, Inc. and American National Standards Insulation Testing of Large AC Rotating Machinery
Institute. New York, NY, 1995. with High Direct Voltage. Institute of Electrical and

ANSI S2.41-1985: Mechanical Vibration of Large Rotating Electronics Engineers, Inc. New York, NY, 2002;
Machines With Speed Ranges From 10 to 200 RPS. Reaffirmed 2012.
Measurement And Evaluation of Vibration Severity IEEE Standard 112-2017: IEEE Standard Test Procedure
In Situ. American National Standards Institute. for Polyphase Induction Motors and Generators. Insti-
New York, NY, 1985; reaffirmed 1997. (Note: Pub- tute of Electrical and Electronics Engineers, Inc.
lished originally by International Organization New York, NY, 2018.
for Standardization; Geneva, Switzerland, 1985; IEEE Standard 115-2009: IEEE Guide: Test Procedures
withdrawn by ISO in 1995 but retained by ANSI.)
for Synchronous Machines. Institute of Electrical and
ISO/IEC 17025:2017: General requirements for the Electronics Engineers, Inc. New York, NY, 2010.
competence of testing and calibration laboratories. In-
IEEE Standard 432-1992: IEEE Guide for Insulation
ternational Elec trotechnical Commission. Geneva,
Maintenance for Rotating Electric Machinery (5 hp
Switzerland, 2017.
to less than 10 000 hp). Institute of Electrical and
CSA-C392-11: Testing of Three-Phase Squirrel Cage Electronics Engineers, Inc. New York, NY, 1992.
Induction Motors During Refurbishment. Cana- IEEE Standard 522-2004: IEEE Guide for Testing Turn-
dian Standards Association. Toronto, ON, 2011. To-Turn Insulation on Form-Wound Stator Coils for

IEC Standard Publication 60034-8: Rotating Electrical Alternating-Current Rotating Electric Machines.
Machines, Part 8: Terminal Markings and Direction Institute of Electrical and Electronics Engineers,
of Rotation of Rotating Machines. International Elec- Inc. New York, NY, 2004.
trotechnical Commission. Geneva, Switzerland, IEEE Standard 792-1995: IEEE Recommended Practice
2007; AMD1:2014. for the Evaluation of the Impulse Voltage Capability of
Insulation Systems for AC Electric Machinery Employ-
IEC Standard Publication 60034-23: Rotating Electrical
Machines, Part 23: Repair, overhaul and reclamation. ing Form-Wound Stator Coils. Institute of Electrical
International Electrotechnical Commission. Ge- and Electronics Engineers, Inc. New York, NY, 1995.
neva, Switzerland, 2019; first edition, 2019. IEEE Standard 1068-2015: IEEE Standard for the Repair
and Rewinding of AC Motors for the Petroleum, Chemi-
IEC Standard Publication 60072-1: Part 1–Frame cal, and Process Industries. Institute of Electrical and
Numbers 56 to 400 and Flange Numbers 55 to 1080. Electronics Engineers, Inc. New York, NY, 2016.
International Electrotechnical Commission. Ge-
neva, Switzerland; seventh edition, 2000. ISO 10012:2003: Measurement management systems
– Requirements for measurement processes and
IEC Standard Publication 60136: Dimensions of measuring equipment. International Organization
Brushes and Brush-holders for Electric Machinery. In- for Standardization. Geneva, Switzerland, 2003;
ternational Electrotechnical Commission. Geneva, Confirmed 2015.
Switzerland; second edition, 1986.
ISO 21940-11: Mechanical vibration – rotor balancing –
IEEE Standard 4-2013: Standard Techniques for Part11: Procedures and tolerances for rotors with rigid
High-Voltage Testing. Institute of Electrical and behaviour. International Organization for Standard-
Electronics Engineers, Inc. New York, NY, 2013. ization. Geneva, Switzerland, 2016.
IEEE Standard 43-2013: IEEE Recommended Practice for ISO 21940-12: Mechanical vibration – rotor balancing – Part
Testing Insulation Resistance of Rotating Machinery. 12: Procedures and tolerances for rotors with flexible behav-
Institute of Electrical and Electronics Engineers, iour. International Organization for Standardization.
Inc. New York, NY, 2014. Geneva, Switzerland, 2016.

Copyright © 2020, EASA, Inc. (Version 0920) 25