Page 787 - APEX MRO Products

WELDING SUPPLIES

Industrial Safety Welding Oilfield Construction

Flowmeters Edge™ Series Single Stage Regulators

F•eaRteugruelsa:tor is pre-set at 20 PSIG. •FeaAtduvraensc: ed design.
• Construction incorporates regulator • Easy-to-use adjusting knob.
• Outstanding flow performance.
and flowmeter into one compact unit.
Test & Approvals: Meets or Exceeds Industry Standards
• Flow tube and float are easily Inlet Pressure: 3,000 psig

changed for different gases. SKU Length Gas Type Flow Range Inlet Outlet
Connection Pressure
• Dual calibration on Argon/ 341-0781-5105 6.6 in Acetylene 2 - 15 psig CGA 510 150 PSIG
341-0781-5132 6.8 in Acetylene 150 PSIG
Carbon Dioxide flow tube. 341-0781-5100 6.6 in Air; Oxygen; Inert Gas 2 -15 psig CGA 510 1250 PSIG
341-0781-5116 6.6 in Air; Oxygen; Inert Gas 1250 PSIG
• Sensitive needle valve for fingertip control. 341-0781-5127 6.8 in Air; Oxygen; Inert Gas 5 - 125 psig CGA 540 1250 psig
• One-piece encapsulated seat design, with an
5 - 125 psig CGA 580
internal filter and PTFE Teflon® seat.
5 - 125 psig CGA 540
• Durable, easy-to-read flow tube and cover.
Flowmeters
Gas Type: Argon
Inlet Connection: CGA 580 •FeaMtuIGre/TsI:G applications.
• Flowtube and outer tube are made of impact
SKU
348-3100200 resistant Lexan for severe applications.

Regulators • Pressures compensate for low surge requirement.

Features: Gas Type: Argon;Helium
Flow Range: 15 - 65 SCFH Argon; 40 - 200 SCFH Helium
• Large, easy to read gauges. Inlet Connection: 1/4 in NPT (M)
• Ergonomic adjusting knob that also shields the Inlet Pressure: 80 psig

adjusting mechanism from contaminants.

SKU Length Gas Type Flow Inlet Inlet Outlet
Range Connection Pressure Pressure
348-3100140 2 in Argon; Helium 0 - 45 CGA 580 4000 PSIG 20 PSIG

348-3000510 4.99 in Oxygen — CGA 540 — —
125-540 125 PSIG
348-3302214 2.5 in Oxygen CGA 540 4000 PSIG

SKU Wt. WELDING SUPPLIES
341-1000-0263 0.83 lb

DFM Dual Flowmeter High Flow CO2 Flowmeters/Flowgauges

Regulators •FeaDteusriegsn:ed for CO2 application (non-siphoned

F•eaDteusriegsn:ed to monitor tube cylinders) High flow CO2 applications
(SR 310 100 PSIG) (SR 311/312 100 SCFH)
two separate processes or gas flows. with adequate supply or source.

• Designed to offer convenience for the maintenance • Designed for core wire applications.
• Machined body and housing cap.
and the fabrication industries. • Stem type seat mechanism.
• Self reseating relief valve (not designed
• If flow is shut-off or restricted downstream of the regulator, the
to protect downstream apparatus).
flow gauge will show indicated flow even though there is none. Test & Approvals: UL Listed; Conforms to CGA E-4
Gas Type: Carbon Dioxide
• Flowmeter shows actual flow. Inlet Connection: CGA 320
Inlet Pressure: 1,500 psig
Test & Approvals: UL Listed
Gas Type: Argon; Helium SKU Length Flow Range Outlet Pressure
Flow Range: 5 - 50 SCFH Argon; 20 - 150 Helium 341-0781-0353 8.38 in 25 - 100 psig 100 psig
Inlet Connection: CGA 580 341-0781-0354 8.38 in 25 - 100 PSIG —
Inlet Pressure: 3,000 psig
Outlet Pressure: 25 psig

SKU Length
341-0781-1153 6.5 in

© 2016 1.800.678.6577 785